Abstract:The flow stress of face-centered cubic (FCC) metals exhibits a rapid increase near a strain rate of 104 s-1 under fixed-strain conditions. However, many existing constitutive models either fail to capture the mechanical characteristics of this plastic deformation or use piecewise strain-rate hardening models to describe this phenomenon. Unfortunately, these piecewise models may suffer from issues such as discontinuity of physical quantities and difficulties in determining segment markers, and struggle to reflect the underlying physical mechanisms that give rise to this mutation phenomenon. In light of this, this paper proposes that the abrupt change in flow stress sensitivity to strain rate in FCC metals can be attributed to microstructural evolution characteristics. To address this, a continuous semiempirical physical constitutive model for FCC metals is established based on the microstructural size evolution proposed by Molinari and Ravichandran and the dislocation motion slip mechanism. This model effectively describes the mutation behavior of strain-rate sensitivity under fixed strain, particularly evident in an annealed OFHC. The predicted results of the model across a wide range of strain rates (10-4-106 s-1) and temperatures (77-1096 K) demonstrate relative errors generally within ±10% of the experimental values. Furthermore, the model is compared with five other models, including the mechanical threshold stress (MTS), Nemat-Nasser-Li (NNL), Preston-Tonks-Wallace (PTW), Johnson-Cook (JC), and Molinari-Ravichandran (MR) models. A comprehensive illustration of errors reveals that the proposed model outperforms the other five models in describing the plastic deformation behavior of OFHC. The error results offer valuable insights for selecting appropriate models for engineering applications and provide significant contributions to the field.

A Rate Dependent Constitutive Model for ECAE Cu Based on Instrumented Nanoindentation Results

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

Constitutive Modelling of Plasticity of Fcc Metals under Extremely High Strain Rates

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

MACRO- AND MICROSCOPIC APPROACHES TO PLANE STRAIN DEFORMATION STATES OF FACE-CENTERED CUBIC METALS UNDER WEDGE INDENTATION

A Constitutive Model for Dynamic Plasticity of FCC Metals

Strain-rate-dependent behaviors of CoCrNiSi 0 . 2 medium-entropy alloy: Deformation mechanism and microstructural-based constitutive modeling

Constitutive Modeling of Annealed OFHC with Wide Strain-Rate and Temperature Effects: Incorporating Dislocation Dynamics and Normalized Microstructural Size Evolution

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

An Elastic–viscoplastic Model of Deformation in Nanocrystalline Metals Based on Coupled Mechanisms in Grain Boundaries and Grain Interiors

A strain rate dependent thermo-elasto-plastic constitutive model for crystalline metallic materials

On the Constitutive Models for Ultra-High Strain Rate Deformation of Metals

From stacking fault to phase transformation: A quantitative model of plastic deformation of CoCrFeMnNi under different strain rates

A mesoscale investigation of strain rate effect on dynamic deformation of single-crystal copper

EBSD Analysis of Deformed and Partially Recrystallized Microstructures in ECAE-Processed Copper

A modified dislocation density-based model of 30CrMnSiA considering the coupling effect of electroplasticity and grain refinement during the pulsed current-assisted plane strain deformation

Electrical-thermal-mechanical coupled modeling and simulation on deformation behaviors of Ti6554 alloy in electrically-assisted micro-tension

Mechanics Modeling for Deformation of Nano-Grained Metals

A thermal activation based constitutive model for the dynamic deformation of AA5083 processed by large-scale equal-channel angular pressing

Dislocation density-based plasticity model from massive discrete dislocation dynamics database