Abstract:The surface modification of ceramic nanofillers is a critical process for preparation of high-performance polymeric microwave dielectric composite. Up to now, the commonly adopted modification methods based on silane coupling agent can improve the dispersibility and compatibility of ceramic nanofillers, while they can't significantly affect the intrinsic dielectric properties of ceramic nanofillers in the microwave band. In this work, we presented a surface modification approach of direct fluorination utilizing F2/N2 to modify nano-silica (nano-SiO2). F2 molecules can directly react with hydroxyl groups as well as uncondensed SiO3/2 to generate a large amount of Si–F and -SiF2- bond with low polarizability on nano-SiO2. As a result, the dielectric constant and loss of nano-SiO2 in the microwave band are greatly reduced. In particular, the dielectric constant of nano-SiO2 at 10 GHz is reduced by 49% from 5.72 to 2.92 and the dielectric loss is reduced by 85% from 0.1490 to 0.0223. In addition, the grafting of fluorine can improve the dispersibility of nano-SiO2 in polyimide (PI) matrix. These superiorities are thus conducive to the preparation of the PI/F–SiO2 composite (PI compounding with fluorinated nano-SiO2) with low dielectric constant and low loss in microwave band. In addition, the PI/F–SiO2 composite film also possesses enhanced thermal-dimensional stability and mechanical properties because of better compatibility of F–SiO2 in PI matrix.

Microwave Dielectric Properties Of Fused Silica Prepared By Different Approaches

Temperature Dependence of Microwave Dielectric Performance of Silica

Synthesis and microwave dielectric properties of (Ca0.7Mg0.3)SiO3 nanopowder prepared at low temperature

Preparation and Dielectric Properties of Low Permittivity Fused Silica Ceramics

B 2 O 3 -modified fused silica microwave dielectric materials with ultra-low dielectric constant

Low‐temperature sintering of microwave ceramics with high Qf values through LiF addition

Low temperature fired CaF<sub>2</sub>-based microwave dielectric ceramics with enhanced microwave properties

Low temperature fired CaF2-based microwave dielectric ceramics with enhanced microwave properties

Preparation and Microwave Dielectric Properties of Cristobalite Ceramics

Fabrication and properties of Si2N2O ceramics for microwave sintering furnace

Significantly reduced intrinsic dielectric constant and loss of nano-silica by direct fluorination

Microwave Dielectric Properties of Sol-Gel Processed Bi4si3o12 Ceramics and Single Crystal

A Microwave Dielectric Ceramic with Ultra-low Dielectric Constant Prepared by Reaction Sintering Method

Low-fired Fluoride Microwave Dielectric Ceramics with Low Dielectric Loss

Effect of solid loading on phase composition, microstructure, mechanical and dielectric properties of fused silica ceramics by gecasting

High-performance (1-X)(0.2b2o3–0.8sio2)–xtio2 (x = 0.025–0.1) Glass Matrix Composites for Microwave Substrate Applications

Modification of Low Temperature Sintered CMS Microwave Dielectric Ceramics Doped with Nanopowder

Microstructure, mechanical and high-temperature dielectric properties of zirconia-reinforced fused silica ceramics

Investigation of PTFE-based ultra-low dielectric constant composite substrates with hollow silica ceramics

Fe-doped SiC/SiO2 Composites with Ordered Inter-Filled Structure for Effective High-Temperature Microwave Attenuation

Sintering characteristics, microstructure and microwave dielectric properties of low-εr CaY2Al4SiO12 composite ceramics