Abstract:Modified polypentafluorophenyl methacrylate with side‐groups of both POSS and alkane is prepared and blended with polypropylene through melt‐blending process. It is proved that this blend not only demonstrates durable hydrophobicity and enhanced mechanical properties due to its surface segregation, orientation, and crosslinking, but also can maintain those properties under many extreme conditions. Durable functionalization on polypropylene (PP) surfaces is always a key problem to besolved. Coatings with low surface energy peel off easily especially under extreme conditions, owing to their weak adhesion. In this paper, side groups of both polyhedral oligomeric silsesquioxane (POSS) and alkane are grafted to polypentafluorophenyl methacrylate (PFP), and then PP blends with these side‐group modified PFP are obtained through a melt‐blending process. It is found that POSS can result in surface segregation and provide hydrophobicity in blends. Microfibers are formed because of the orientation effect during the tensile testing, which furtherly promotes mechanical strength. Significantly, alkaneside‐groups can be entangled with PP segments, which brings about cross linking. Therefore, with crosslinking and synchronous orientation of POSS, the elongation at the break of blends is greatly increased up to 974%. The final blend demonstrates quite durable hydrophobicity under many extreme conditions, such as repeated tape peeling, ultrasonic washing, strong friction, and soaking in strong acid (pH = 1), strong alkali (pH = 14) and alcohol. The heat and UV resistance of the blend are also obviously improved. This study will develop anovel and facile strategy to endow PP with durable hydrophobicity as well as greatly enhanced mechanical properties.

The Approaches for Promoting PP Adhesion Based on the Surface Modification

Reducing the Surface Stickiness of Multiphase Polypropylene Particles: an Environmentally Friendly and Scalable Method

Adhesion Properties of Atactic Polypropylene/acrylate Blend Copolymer and Its Adhesion Mechanism for Untreated Polypropylene Materials

Advances in Modification of Ethylene Propylene Random Copolymer

Surface Modification of Polypropylene by the Entrapping Method Using the Short-Chained Stearyl-Alcohol Poly(Ethylene Oxide) Ether Modifier

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Graft Modification of Chlorinated Polypropylene and Coating Performance Promotion for Polypropylene

A Novel Approach for the Surface Modification of Polymeric Membrane with Phospholipid Polymer

Performance and use of modified chlorinated polypropylene

Biopolymer Coating for Particle Surface Engineering and Their Biomedical Applications

An Effective Surface Modification of Carbon Fiber for Improving the Interfacial Adhesion of Polypropylene Composites

Polypropylene Blends with Durable Hydrophobicity and Enhanced Mechanical Properties Based on POSS and Alkane Modified Polypentafluorophenyl Methacrylate

A Novel Method for Functionalization of Polypropylene with Oligomer of Glycidyl Methacrylate: Characterization of Copolymers

Crystalline Modifications and Nucleating Agents for Polypropylene

A Mechanistic Investigation of the Directional Entrapping Modification on the Semicrystalline Polypropylene Surface

A Facile Approach to Modify Polypropylene Flakes Combining O2-plasma Treatment and Graft Polymerization of L-lactic Acid

Modification of surface properties of polypropylene (PP) film using DC glow discharge air plasma

Effect of Modified Polypropylene on the Interfacial Bonding of Polymer–aluminum Laminated Films

Bio-inspired Polydopamine Functionalization of Carbon Fiber for Improving the Interfacial Adhesion of Polypropylene Composites

Study the Application of Polydopamine Preparation Technology in the Interface Modification of Phthalonitrile Composite

Enhancing Mechanical Performance of High-Lignin-Filled Polypropylene via Reactive Extrusion