The Effect of Tunable Modification Parameters on the Structure and Properties of Polypropylene with Cyclotrimerization Surface of Isocyanates
Menghan Sun,Xianming Zhang,Wenxing Chen,Lianfang Feng
DOI: https://doi.org/10.1002/app.43327
IF: 3
2016-01-01
Journal of Applied Polymer Science
Abstract:ABSTRACTThe cyclotrimerization of methylene diphenyl 4,4‐diisocyanate (MDI) and 3‐isopropenyl‐α,α′‐dimethylbenzene isocyanate (TMI) was applied on the bead/membrane surfaces of a polypropylene (PP)‐bearing isocyanate group to synthesize a protective networked polymer. Chemical structures of these molecules were characterized through attenuated total reflectance–Fourier transform infrared spectroscopy. Results showed that the absorption peak of isocyanate group at 2255 cm−1 became negligible after the reaction was completed. The absorption peaks of the isocyanurate groups appeared simultaneously at 1600 cm−1 and at 1510–1560 cm−1; this result indicated that the grafted isocyanates were almost consumed, thereby forming isocyanurates. Energy X‐ray dispersive spectroscopy revealed that oxygen content increased; indeed, isocyanurate was formed on the PP surface. Pure PP beads, PP‐g‐TMI, and cyclotrimerization products were also subjected to thermal property tests to investigate their corresponding thermal stabilities. Cyclotrimerization could result in the increase in PP‐grafted decomposition temperature, even slightly higher than pure PP. Rheological behavior in oscillatory flow was also evaluated; the storage modulus, loss modulus, and complex viscosity of cyclotrimerization products were higher than those of the PP‐grafted membranes. Surface morphology was further observed through field‐emission scanning electron microscopy and atomic force microscopy. The cyclotrimerization products contained blocks and exhibited a rough surface. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43327.