Abstract:Polyethylene (PE) microporous membrane-supported thin-film composite (TFC) polyamide membranes have received growing attention owing to their low cost, superior separation performance, and excellent chemical robustness. Developing facile and cost-effective methods to hydrophilize PE membranes is essential for the scale-up of PE-supported TFC membranes. Here, a facile approach of in situ polymerization of m -phenylenediamine (MPD) was employed to hydrophilize the PE membranes for the first time. Characterizations showed that both the outer surface and the interior of the PE membrane were homogeneously coated with poly( m -phenylenediamine) (PMPD). The hydrophilicity of the modified PE membrane was dramatically enhanced with the water contact angle decreasing from ∼120° to ∼72° and water flux at 2 bar increasing from 0 to ∼640 L m −2 h −1 . The high surface porosity and appropriate surface hydrophilicity of the MPD-modified PE membrane together with the excellent coating uniformity favor the formation of a highly permselective polyamide active layer. The outstanding coating stability was demonstrated through different tests. The cost of the MPD-modified PE membrane is estimated to be less than 1% of that of conventional substrates. Furthermore, high-performance and low-cost reverse osmosis (RO) membranes were prepared via interfacial polymerization on the MPD-modified PE substrates. The PE-supported RO membrane exhibited an excellent separation performance with NaCl rejection of 99.3%, pure water permeance of 1.3 L m −2 h −1 bar −1 , and long-term operating stability. The proposed hydrophilization strategy of PE membrane is facile, low-cost, environmentally friendly, and reliable, and thus has a brilliant prospect for industrialization.

A Directional Entrapment Modification on the Polyethylene Surface by the Amphiphilic Modifier of Stearyl-Alcohol Poly(ethylene Oxide) Ether

Surface Modification of Polypropylene by the Entrapping Method Using the Short-Chained Stearyl-Alcohol Poly(Ethylene Oxide) Ether Modifier

Hydrophilic improvement and water immersion durability of the HDPE surface by the entrapping with the amphiphilic modifier

A Mechanistic Investigation of the Directional Entrapping Modification on the Semicrystalline Polypropylene Surface

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Porous membranes modified by hyperbranched polymers II.Effect of the arm length of amphiphilic hyperbranched-star polymers on the hydrophilicity and protein resistance of poly(vinylidene fluoride) membranes

Does Hydrophilic Polydopamine Coating Enhance Membrane Rejection of Hydrophobic Endocrine-Disrupting Compounds?

Surface Modification Of Linear Low-Density Polyethylene Film By Amphiphilic Graft Copolymers Based On Poly(Higher Alpha-Olefin)-Graft-Poly(Ethylene Glycol)

Influences of extractant on the hydrophilicity and performances of HDPE/PE-b-PEG blend membranes prepared via thermally induced phase separation (TIPS) process

HYDROPHILIC MODIFICATION OF PPESK POROUS MEMBRANES VIA AQUEOUS SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION

Surface Engineering of Poly(DL-lactic acid) by Entrapment of Biomacromolecules

Influences of extractant on the hydrophilicity and performances of HDPE/PE‐<i>b</i>‐PEG blend membranes prepared via thermally induced phase separation (TIPS) process

Effects of the Extractant on the Hydrophilicity and Performance of High-Density Polyethylene/Polyethylene-B-Poly(Ethylene Glycol) Blend Membranes Prepared Via A Thermally Induced Phase Separation Process

Hydrophilic modification of poly(phthalazine ether sulfone ketone) ultrafiltration membranes by the surface immobilization of poly(ethylene glycol) acrylates

A Facile Method of Surface Modification for Hydrophobic Polymer Membranes Based on the Adhesive Behavior of Poly(dopa) and Poly(dopamine)

Surface Modification by Poly(ethylene Glycol) with Different End-Grafted Groups: Experimental and Theoretical Study.

Facile hydrophilization of polyethylene substrate by in situ polymerization of m -phenylenediamine for preparing high-performance polyamide reverse osmosis membrane

Well-defined PE-b-PTFE Diblock Copolymers Via Combination of Coordination Chain Transfer Polymerization and Condensation Reaction: Facile Preparation and Surface Modification of Polyethylene Film

Tethering Hydrophilic Polymer Brushes Onto PPESK Membranes Via Surface-Initiated Atom Transfer Radical Polymerization

Segregation-induced in Situ Hydrophilic Modification of Poly (vinylidene Fluoride) Ultrafiltration Membranes Via Sticky Poly (ethylene Glycol) Blending

Effects of polyethyleneimine molecular weight and proportion on the membrane hydrophilization by codepositing with dopamine