Abstract:With the rising demand for medical implants and the dominance of implant-associated failures including infections, extensive research has been prompted into the development of novel biomaterials that can offer desirable characteristics. This study develops and evaluates new titanium-based alloys containing gallium additions with the aim of offering beneficial antibacterial properties while having a reduced stiffness level to minimise the effect of stress shielding when in contact with bone. The focus is on the microstructure, mechanical properties, antimicrobial activity, and cytocompatibility to inform the suitability of the designed alloys as biometals. Novel Ti-33Nb-xGa alloys (x = 3, 5 wt%) were produced via casting followed by homogenisation treatment, where all results were compared to the currently employed alloy Ti-6Al-4V. Optical microscopy, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) results depicted a single beta (β) phase microstructure in both Ga-containing alloys, where Ti-33Nb-5Ga was also dominated by dendritic alpha (α) phase grains in a β-phase matrix. EDS analysis indicated that the α-phase dendrites in Ti-33Nb-5Ga were enriched with titanium, while the β-phase was richer in niobium and gallium elements. Mechanical properties were measured using nanoindentation and microhardness methods, where the Young's modulus for Ti-33Nb-3Ga and Ti-33Nb-5Ga was found to be 75.4 ± 2.4 and 67.2 ± 1.6 GPa, respectively, a significant reduction of 37% and 44% with respect to Ti-6Al-4V. This reduction helps address the disproportionate Young's modulus between titanium implant components and cortical bone. Importantly, both alloys successfully achieved superior antimicrobial properties against Gram-negative P. aeruginosa and Gram-positive S. aureus bacteria. Antibacterial efficacy was noted at up to 90 ± 5% for the 3 wt% alloy and 95 ± 3% for the 5 wt% alloy. These findings signify a substantial enhancement of the antimicrobial performance when compared to Ti-6Al-4V which exhibited very small rates (up to 6.3 ± 1.5%). No cytotoxicity was observed in hGF cell lines over 24 h. Cell morphology and cytoskeleton distribution appeared to depict typical morphology with a prominent nucleus, elongated fibroblastic spindle-shaped morphology, and F-actin filamentous stress fibres in a well-defined structure of parallel bundles along the cellular axis. The developed alloys in this work have shown very promising results and are suggested to be further examined towards the use of orthopaedic implant components.

Ti–Ga Binary Alloys Developed As Potential Dental Materials

Development and properties of dental Ti–Zr binary alloys

Screening on Binary Ti Alloy with Excellent Mechanical Property and Castability for Dental Prosthesis Application

Microstructure, Mechanical Properties, Castability and in Vitro Biocompatibility of Ti-Bi Alloys Developed for Dental Applications.

Ti-Ge binary alloy system developed as potential dental materials.

Development and Properties of Ti–In Binary Alloys As Dental Biomaterials

A Dual Functional Ti-Ga Alloy: Inhibiting Biofilm Formation and Osteoclastogenesis Differentiation Via Disturbing Iron Metabolism

Improved Mechanical, Bio-Corrosion Properties and in Vitro Cell Responses of Ti-Fe Alloys As Candidate Dental Implants

Ga-containing Ti alloy with improved osseointegration for bone regeneration: In vitro and in vivo studies

Microstructure, mechanical properties, and preliminary biocompatibility evaluation of binary Ti–Zr alloys for dental application

Development of Ti-Ag-Fe ternary titanium alloy for dental application.

ZrCuFeAlAg thin film metallic glass for potential dental applications

Mechanical Properties, Biodegradation Behavior, and Cytocompatibility of As-Cast Mg-Ga Alloys for Bone Implant Applications

Cytocompatibility, Stability and Osteogenic Activity of Powder Metallurgy Ta-xZr Alloys As Dental Implant Materials

β-Ti Alloys for Orthopedic and Dental Applications: A Review of Progress on Improvement of Properties through Surface Modification

Biocompatibility and Osteogenic Activity of Zr?30Ta and Zr?25Ta?5Ti Sintered Alloys for Dental and Orthopedic Implants

beta-Ti Alloys for Orthopedic and Dental Applications: A Review of Progress on Improvement of Properties through Surface Modification

Development of Novel Antibacterial Ti-Nb-Ga Alloys with Low Stiffness for Medical Implant Applications

Microstructure, Mechanical Behavior and Biocompatibility of Powder Metallurgy Nb-Ti-Ta Alloys As Biomedical Material.

In vitro and in vivo evaluation of osteogenesis and antibacterial activity of MgGa alloys

Cytocompatibility of Ti–xZr Alloys As Dental Implant Materials