Abstract:Abstract This paper presents an experimental work to study the effect of dune sand as an alternative to sand on the mechanical properties of hybrid fiber reinforced concrete. 24 concrete mixes were prepared, 6 of them without fibers and containing different proportions of dune sand, and 18 concrete mixes with the same proportions of dune sand but containing long and short single and hybrid steel fibers. For the purpose of studying the properties of hybrid concrete, including measuring the workability of fresh concrete, examining the compressive strength, dry density, split tensile strength, Flexural strength, ultrasonic pulse velocity testing, water absorption of hardened concrete. The main parameters were the proportions of dune sand (20 %, 40 %, 60 %, 80 %, and 100 %) in addition to the ratio 0 % without dune sand. Two types of steel fibers were used: straight steel fibers (short) with a length of 13 mm and hook end steel fibers (long) with a length of 50 mm, It is added to concrete (single or hybrid) with a total volume ratio of 1 % of the concrete volume. The tests that were conducted showed that sand dunes affect the compressive strength, especially when the percentage increased by more than 40 %, where the compressive strength of concrete decreases by 39 % when the replacement ratio reaches 100 %, but it improves with the addition of single or hybrid fibers. Also, the workability from high to medium level decreases by 30 % with increasing dune sand content, the addition of steel fibers along with dune sand significantly reduced the workability. The tensile and flexural strength decreases with the increase in the sand dune rate, but at a lower rate than the compressive strength, which was 29.3 %, 21.1 % for splitting and flexural tensile strength, respectively. The addition of steel fibers improved the mechanical properties of the hybrid concrete, which can compensate for most of the lost strength due to the increase in sand dunes ratios. The study also showed that the use of long fibers (hook end) gives better results than straight fibers. But in the case of using hybrid fibers, we can get an improvement in the mechanical properties more than using one type of fiber.

Behavior of Concrete-Filled Steel Tubular Stub Columns and Beams Using Dune Sand As Part of Fine Aggregate

Dune Sand Concrete-Filled Steel Tubular (CFST) Stub Columns under Axial Compression: Experiments

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Shear Fatigue Behavior of Reinforced Concrete Beams Produced with Manufactured Sand As Alternatives for Natural Sand

Effect of concrete wet packing density on the uni‐axial strength of manufactured sand CFST columns

Behavior Of Stainless Steel-Furnace Slag Aggregate Concrete-Carbon Steel Double-Skin Tubular (Dst) Stub Columns Under Sustained Loading And Axial Compression

Behavior of concrete-filled double steel tube stub columns under partial compression

High strength steel square and rectangular tubular stub columns infilled with concrete

Effect of Dune Sand as Sand Replacement on the Mechanical Properties of the Hybrid Fiber Reinforced Concrete

Mechanical properties and acoustic emission analysis of desert sand concrete reinforced with steel fiber

Impact of D/t Ratio on Circular Concrete-Filled High-Strength Steel Tubular Stub Columns under Axial Compression

Compressive behavior of CFDST columns: Effects of thin-walled inner steel tubes

Experiments on the Bearing Capacity of Tapered Concrete Filled Double Skin Steel Tubular (CFDST) Stub Columns

Eccentric compressive behavior of square concrete-encased concrete-filled double-skin steel tubular stub columns

Experimental Investigation on Blast Furnace Slag Aggregate Concrete Filled Double Skin Tubular (CFDST) Stub Columns under Sustained Loading

Axial Compression Behavior of Circular Seawater and Sea Sand Concrete Columns Reinforced with Hybrid GFRP–Stainless Steel Bars

Research on Axial Compression Test and Finite Element Analysis of Sea Sand Concrete Filled CFRP-Steel-CFRP Composite Circular Tubular Stub Column

Experimental and numerical investigations of square concrete-filled double steel tubular stub columns

Experimental Studies On The Strength With High Slenderness Ratio Concrete Filled Steel Tubular Columns

Mechanical performance of steel tubes filled with demolished concrete lumps under axial compression

Axial Compressive Behavior of Hybrid CFRP-concrete-steel Double-Skin Tubular Columns