Abstract:This article presents an investigation into the effects of natural seawater and sea sand on the behaviour of unconfined and fibre-reinforced polymer-confined concrete. The experimental programme covered compression tests of a large number of standard concrete cylinders, which were prepared from the following four series of concrete: (1) the reference normal concrete, (2) sea-sand concrete, (3) seawater concrete (SwC), and (4) seawater sea-sand concrete. The concrete cylinders were either unconfined or confined with externally wrapped carbon fibre-reinforced polymer jackets to be tested at various ages from the early to the long term. This article presents the results of the first-phase tests, which covered a total of 48 specimens from the four series of concrete, with a half of them tested in the unconfined condition at the ages of 7 and 28 days, and another half tested with either one-ply or two-ply carbon fibre-reinforced polymer jackets at 28 days. The results show that at the ages of 7 and 28 days, the unconfined concrete specimens prepared with seawater and/or sea sand developed a slightly higher compressive strength, as compared to those prepared from normal concrete. When confined with carbon fibre-reinforced polymer jackets, the compressive stress–strain responses of concrete with or without seawater and/or sea sand were very similar. The use of seawater and sea sand did not seem to have significant effects on the compressive strength, ultimate axial strain and stress–strain responses of confined concrete, and the ultimate strain capacity of carbon fibre-reinforced polymer jackets neither. The test results were also compared with the predictions of an existing analysis-oriented stress–strain model for fibre-reinforced polymer-confined concrete. It is shown that the compressive strength, ultimate axial strain, stress–strain responses and dilation behaviour of the carbon fibre-reinforced polymer-confined concrete with or without seawater/sea sand can be reasonably well predicted.

Effect of concrete wet packing density on the uni‐axial strength of manufactured sand CFST columns

Effects of Natural Seawater and Sea Sand on the Compressive Behaviour of Unconfined and Carbon Fibre-Reinforced Polymer-Confined Concrete

Effects of Packing on Compressive Behaviour of Recycled Aggregate Concrete

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Axial Compressive Behavior and Load Carrying Capacity Prediction of Prefabricated UHPC Tube Filled with Seawater Sea-Sand Coral Aggregate Concrete

Shear Fatigue Behavior of Reinforced Concrete Beams Produced with Manufactured Sand As Alternatives for Natural Sand

Numerical Investigation on Compressive Performance of CFST Columns with Encased Built-Up Lattice-Angles

Experimental Study on Dynamic Response of CFRCM Confined Seawater Sea Sand RC Columns Subjected to Lateral Impact

Behavior of Concrete-Filled Steel Tubular Stub Columns and Beams Using Dune Sand As Part of Fine Aggregate

Self-compacting Concrete-Filled Steel Tubes Prepared from Manufactured Sand with a High Content of Limestone Fines

Uni-axial behaviour of steel slag concrete-filled-steel-tube columns with external confinement

Compressive behaviour of circular CFDST short columns with high- and ultrahigh-strength concrete

Axial Compressive Behavior and Model Assessment of FRP-confined Seawater Sea-sand Concrete-Filled Stainless Steel Tubular Stub Columns

Dune Sand Concrete-Filled Steel Tubular (CFST) Stub Columns under Axial Compression: Experiments

Experimental and simulation study on seismic performance of steel‐PVA hybrid fiber cementitious composites‐encased CFST

Effect of compression casting method on the axial compressive behavior of FRP-confined seawater sea-sand concrete columns

Mechanical behavior and design applicability of ultra-high-performance concrete-filled circular steel tubular short columns under axial compression

Experimental and numerical behavior of eccentrically loaded square concrete-filled steel tubular long columns made of high-strength steel and concrete

Experimental study and numerical simulation of impact compression mechanical properties of high strength coral aggregate seawater concrete

Experimental and numerical investigation on the behaviour of square concrete-filled cold-formed double-skin steel stiffened tubular short columns

Multiscale insights on compression cast sea sand and seawater concrete