Abstract:Due to the volume expansion effect during charge and discharge processes, the application of transition metal oxide anode materials in lithium-ion batteries is limited. Composite materials and carbon coating are often considered feasible improvement methods. In this study, three types of TiO2@Fe3O4@C microspheres with a core–double-shell structure, namely TFCS (TiO2@Fe3O4@C with 0.0119 g PVP), TFCM (TiO2@Fe3O4@C with 0.0238 g PVP), and TFCL (TiO2@Fe3O4@C with 0.0476 g PVP), were prepared using PVP (polyvinylpyrrolidone) as the carbon source through homogeneous precipitation and high-temperature carbonization methods. After 500 cycles at a current density of 2 C, the specific capacities of these three microspheres are all higher than that of TiO2@Fe2O3 with significantly improved cycling stability. Among them, TFCM exhibits the highest specific capacity of 328.3 mAh·g−1, which was attributed to the amorphous carbon layer effectively mitigating the capacity decay caused by the volume expansion of iron oxide during charge and discharge processes. Additionally, the carbon coating layer enhances the electrical conductivity of the TiO2@Fe3O4@C materials, thereby improving their rate performance. Within the range of 100 to 1600 mA·g−1, the capacity retention rates for TiO2@Fe2O3, TFCS, TFCM, and TFCL are 27.2%, 35.2%, 35.9%, and 36.9%, respectively. This study provides insights into the development of new lithium-ion battery anode materials based on Ti and Fe oxides with the abundance and environmental friendliness of iron, titanium, and carbon resources in TiO2@Fe3O4@C microsphere anode materials, making this strategy potentially applicable.

Improved Capacity and Rate Capability of Fe2O3 Modified Li4Ti5O12 Anode Material

ChemInform Abstract: Improved Capacity and Rate Capability of Fe2O3 Modified Li4Ti5O12 Anode Material.

High Rate Li4Ti5O12–Fe2O3 and Li4Ti5O12–CuO Composite Anodes for Advanced Lithium Ion Batteries

Spherical Li4Ti5O12/NiO Composite With Enhanced Capacity and Rate Performance as Anode Material for Lithium-Ion Batteries

Enhanced Electrochemical Performance of a Novel Li4Ti5O12 Composite As Anode Material for Lithium-Ion Battery in a Broad Voltage Window

Improving the Lithium Storage Properties of Li4Ti5O12 Anodes by Facile Two-Phase Formation and Nanostructure Engineering Strategy

Study of TiO2-Coated Α-Fe2o3 Composites and the Oxygen-Defects Effect on the Application As the Anode Materials of High-Performance Li-Ion Batteries

Al2O3 Coated Li4Ti5O12 Electrode with Enhanced Cycle Performance for Lithium Ion Battery

Preparation and Electrochemical Performance of Li4Ti5O12/Co3O4 Composite as an Anode of Lithium-Ion Battery

Li<sub>0.99</sub>Ti<sub>0.01</sub>FePO<sub>4</sub>/C composite as cathode material for lithium ion battery

FeO/C anode materials of high capacity and cycle stability for lithium-ion batteries synthesized by carbothermal reduction

Improvement of Electrochemical Performance of LiFePO4 Cathode Materials for Lithium-Ion Battery

Significant Improved Electrochemical Performance of Spinel LiMn<sub>2</sub>O<sub>4</sub> Promoted by FePO<sub>4</sub> Incorporation

Significant improved electrochemical performance of spinel LiMn 2O4 promoted by FePO4 incorporation

Li 0.99 Ti 0.01 FePO 4 /C composite as cathode material for lithium ion battery

Li2ZnTi3O8@α-Fe2O3 Composite Anode Material for Li-ion Batteries

Preparation and effects of F-doping on electrochemical properties of Li4Ti5O12 as anode material for Li-ion battery

Core–Double-Shell TiO2@Fe3O4@C Microspheres with Enhanced Cycling Performance as Anode Materials for Lithium-Ion Batteries

High-capacity and Long-Life Fe2O3/MOFs Composite Anodes: Preparation, Characterization, Morphology Regulation and Electrochemical Performance

Carbon-coated Fe3O4 nanocomposites anchored on Ti3C2 nanosheets for enhanced Li-storage

Soft Template PEG-assisted Synthesis of Fe 3 O 4 @C Nanocomposite As Superior Anode Materials for Lithium-Ion Batteries