Abstract:The cathode materials of spinel LiMn2O4 coated with 1.5(wt)%Al2O3 and Al doped LiAlxMn2-xO4(x=0.1,0.2,0.3,0.4)were synthesized.The structures and morphologies of the as-prepared materials were characterized by X-ray diffraction(XRD) and Field scanning electron microscopy(FSEM).The results showed that the diffraction of LiMn2O4 modified is similar,with all the peaks index able in the Fd3m space group,but the positions of the diffraction peak shift to higher angle;Al2O3particles appear on the surface of the coated spinel LiMn2O4and powders of Al doped LiMn2O4have the uniform,nearly cubic structure morphology with narrow size distribution which is less than 500nm.Galvanostatic charge-discharge test indicated that cycle performance of LiMn2O4 can be improved significantly after coated or doped.Among all modified samples,LiMn2O4 coated with 1.5(wt)%Al2O3 and LiAl0.2Mn1.8O4had the better electrochemical performance and same initial discharge capacity of 99.7 mAh/g.The capacities retained of 87.4% and 88.4% after 50 cycles,respectively.In initial charge,the EIS of LiAl0.3Mn1.7O4 electrode consist of the semicircle of high frequency region and a arc of low frequency region which continue to narrow as increasing of polarization potential,to evolve into the semicircle at 3.95V and at same time the slash related with the lithium-ion diffusion in the EIS low frequency region emerge.The resistance of SEI film and the thickness of SEI were decrease with the increase of polarization potential,but the charge transfer resistance Rct was first decreasing and then increasing and LiAl0.4Mn1.6O4 had smaller Rct than that of LiAl0.3Mn1.7O4corresponding to the extraction of Li+ions.

Significant Improved Electrochemical Performance of Spinel LiMn<sub>2</sub>O<sub>4</sub> Promoted by FePO<sub>4</sub> Incorporation

Significant improved electrochemical performance of spinel LiMn 2O4 promoted by FePO4 incorporation

Performance Improvement of Li-rich Layer-Structured Li1.2Mn0.54Ni0.13Co0.13O2 by Integration with Spinel LiNi0.5Mn1.5O4

Electrochemical Performance of LiMn2O4/LiFePO4 Blend Cathodes for Lithium Ion Batteries

Enhancing electrochemical performance of Mn doped LiFePO4 cathode materials for lithium-ion batteries

Effect of Heat Treatment on the Structure and Electrochemical Performance of FePO4 Coated Spinel LiMn2O4

Improved Electrochemical Performance of 5 V Spinel LiNi 0 . 5 Mn 1 . 5 O 4 Microspheres by F-doping and Li 4 SiO 4 Coating

Influence of Coexisting Li3PO4 on Electrochemical Properties of LiFePO4

Electrochemical Performance of Spinel LiMn_2O_4 Modified

Enhanced Cycling Performance of Spinel LiMn 2 O 4 Coated with ZnMn 2 O 4 Shell

Improved Electrochemical Performance of LiMn 0.6 Fe 0.4 PO 4 via Chitosan‐Derived Nitrogen‐Doped Carbon Coating

Enhanced Cycling Stability of LiMn2O4 by Surface Modification with Melting Impregnation Method

Enhanced Electrochemical Property of FePO4-coated LiNi0.5Mn1.5O4 As Cathode Materials for Li-ion Battery

Studies of the electrochemical properties and thermal stability of LiNi 1/3 Co 1/3 Mn 1/3 O 2 /LiFePO 4 composite cathodes for lithium ion batteries

Electrochemical Performance and Stability of LiMn0.6Fe0.4PO4/C Composite

Improvement of Electrochemical Performance of LiFePO4 Cathode Materials for Lithium-Ion Battery

Binding Li 3 PO 4 to Spinel LiNi 0.5 Mn 1.5 O 4 via a Surface Co‐Containing Bridging Layer to Improve the Electrochemical Performance

Mn-Rich Induced Alteration on Band Gap and Cycling Stability Properties of LiMnxFe1-xPO4 Cathode Materials.

Surface Modification Driven Initial Coulombic Efficiency and Rate Performance Enhancement of Li1.2Mn0.54Ni0.13Co0.13O2 Cathode

Electrochemical performance of LiMnPO 4 by Fe and Zn co-doping for lithium-ion batteries

Electrochemical Performance of LiMnPO4 by Fe and Zn Co-Doping for Lithium-Ion Batteries