Abstract:How to improve the diffusion coefficient of Lithium ions in active materials is very necessary, which is responsible for the electrochemical performance. In this present contribution, LiFe10/12Co1/12Mn1/12P11/12S1/12 O4(LF(CM)P(S)O) are designed and the stability, lithium ion diffusion rate, lithium intercalation potential, discharge curve, and electronic performances are systematically explored. The LF(CM)P(S)O shows the better stability with the formation energy of 2.01 eV. The lithium ion diffusion barrier of the system is reduced from 1.02 to 0.57 eV after doping, predicting that the lithium ion diffusion rate in LF(CM)P(S)O is 10 orders of magnitude faster than that of intrinsic system. The characteristic transition from p-type to n-type semiconductor is present due to the doping of S, and the doping of Mn and Co leads to the generation of impurity bands and the reduction of band gap from 3.78 to 0.737 eV. The effective mass of electrons in the doped system is 1.59m0, much greater than 1m0, which is conducive to the improvement of its conductivity. The charge density difference and electron localization function (ELF) demonstrates that the disappearance of electron enrichment and the decrease of the localization are responsible for the rapid migration of the lithium ion. The high operating voltage, charge-discharge platform of 4.7 V and the voltage difference contribute to the promotion of electrochemical performance, which open a window for the commercialization application of Li-ion battery.

Electrochemical performance of LiMnPO 4 by Fe and Zn co-doping for lithium-ion batteries

Electrochemical Performance of LiMnPO4 by Fe and Zn Co-Doping for Lithium-Ion Batteries

Elucidation of Synergistic Effect of Mg-co-doping on Electrochemical Performance of Mn-doped LiNiO2

Enhancing electrochemical performance of Mn doped LiFePO4 cathode materials for lithium-ion batteries

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Enhanced electrochemical performance and storage mechanism of LiFePO4 doped by Co, Mn and S elements for lithium-ion batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Based on first-principles calculation, study on the synthesis, and performance of Fe–Ni co-doped LiMnPO4/C as cathode material for lithium-ion batteries

Effect of Heteroatom Doping on Electrochemical Properties of Olivine LiFePO4 Cathodes for High-Performance Lithium-Ion Batteries

A critical revelation of lithium ferromanganese phosphate (LMFP) performance in a Mn-rich cathode for Li-ion batteries using Fe equivalents to occupy a Mn site

In situ doping of lithium iron phosphate with excellent water-soluble zinc salt was used to improve its magnification performance

The prepared and electrochemical property of Mg-doped LiMn0.6Fe0.4PO4/C as cathode materials for lithium-ion batteries

Oleic Acid-Assisted Preparation of LiMnPO 4 and Its Improved Electrochemical Performance by Co Doping

Effect of Mn content on electrochemical performance and energy density of LiFe1-xMnxPO4/C

Enhancing the Mn Redox Kinetics of LiMn0.5Fe0.5PO4 Cathodes Through a Synergistic Co-Doping with Niobium and Magnesium for Lithium-Ion Batteries

Synthesis and Characterization of M-doped Li1.05Co0.3Ni0.35Mn0.3O2 (M=Zn, Fe, Ti, Zr) Cathode Materials for Lithium ion Battery

Synthesis and Electrochemical Properties of Molybdenum-Doped LiMn0.6Fe0.4PO4 Cathode Materials

Doping Effects on Electronic Conductivity and Electrochemical Performance of Lifepo4

Revealing electrochemical performance of Ni doping LiFePO4 composite

Effect of Cationic (Na+) and Anionic (F−) Co-Doping on the Structural and Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Cathode Material for Lithium-Ion Batteries

Mn-doped LiFePO 4 @C as a high-performance cathode material for lithium-ion batteries