Abstract:The cathode materials of spinel LiMn2O4 coated with 1.5(wt)%Al2O3 and Al doped LiAlxMn2-xO4(x=0.1,0.2,0.3,0.4)were synthesized.The structures and morphologies of the as-prepared materials were characterized by X-ray diffraction(XRD) and Field scanning electron microscopy(FSEM).The results showed that the diffraction of LiMn2O4 modified is similar,with all the peaks index able in the Fd3m space group,but the positions of the diffraction peak shift to higher angle;Al2O3particles appear on the surface of the coated spinel LiMn2O4and powders of Al doped LiMn2O4have the uniform,nearly cubic structure morphology with narrow size distribution which is less than 500nm.Galvanostatic charge-discharge test indicated that cycle performance of LiMn2O4 can be improved significantly after coated or doped.Among all modified samples,LiMn2O4 coated with 1.5(wt)%Al2O3 and LiAl0.2Mn1.8O4had the better electrochemical performance and same initial discharge capacity of 99.7 mAh/g.The capacities retained of 87.4% and 88.4% after 50 cycles,respectively.In initial charge,the EIS of LiAl0.3Mn1.7O4 electrode consist of the semicircle of high frequency region and a arc of low frequency region which continue to narrow as increasing of polarization potential,to evolve into the semicircle at 3.95V and at same time the slash related with the lithium-ion diffusion in the EIS low frequency region emerge.The resistance of SEI film and the thickness of SEI were decrease with the increase of polarization potential,but the charge transfer resistance Rct was first decreasing and then increasing and LiAl0.4Mn1.6O4 had smaller Rct than that of LiAl0.3Mn1.7O4corresponding to the extraction of Li+ions.

Al2O3 Coated Li4Ti5O12 Electrode with Enhanced Cycle Performance for Lithium Ion Battery

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Electrochemical Performance of Spinel LiMn_2O_4 Modified

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

Synthesis and Electrochemical Performances of Li4Ti4.95Al0.05O12/C As Anode Material for Lithium-Ion Batteries

Carbon-coated Li4Ti5O12–TiO2 Microspheres As Anode Materials for Lithium Ion Batteries

Improvement of Electrochemical Performance for AlF 3 -Coated Li 1.3 Mn 4/6 Ni 1/6 Co 1/6 O 2.40 Cathode Materials for Li-ion Batteries

Enhanced electrochemical properties of Li1·2Ni0·13Co0·13Mn0·54O2 coated with Al2O3 nano-film

Thin Aluminum Film Improving the Cycle Performance of Positive Electrode of Lithium Ion Battery

Improving the Lithium Storage Properties of Li4Ti5O12 Anodes by Facile Two-Phase Formation and Nanostructure Engineering Strategy

The Synergistic Effect Supported Li 4 Ti 5 O 12 Anode with Advanced Lithium Storage Performance

Enhancement of Electrochemical Performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 by Surface Modification with Li4Ti5O12

Enhanced electrochemical performances of 5 v spinel LiMn 1.58Ni0.42O4 cathode materials by coating with LiAlO2

Performance of Amorphous Lithium Phosphate Coated Lithium Titanate Electrodes in Extended Working Range of 0.01-3.00 V

Improving the electrochemical properties of Al, Zr Co-doped Li4Ti5O12 as a lithium-ion battery anode material

Effect of TiO2-coating on the Electrochemical Performances of LiCo1/3Ni1/3Mn1/3O2

Surface Structure and High-Rate Performance of Spinel Li4ti5o12 Coated with N-Doped Carbon As Anode Material for Lithium-Ion Batteries

Preparation and Electrochemical Properties of Li4Ti5O12 Thin Film Electrodes by Pulsed Laser Deposition

Improved Capacity and Rate Capability of Fe2O3 Modified Li4Ti5O12 Anode Material

Fabrication of TiO2 In-Situ Decorated and Hierarchical Li4Ti5O12 for Improved Lithium Storage

Surface Modification Improves Spinel LiCoO2 Li-Ion Battery Cathode Materials Grown by Low Temperature Solvothermal Flow Reaction