Abstract:For Nd2Fe14B/α-Fe nanocomposite magnets, which exhibit great superiority in theoretical energy products, it is a great challenge to obtain controlled nano-scale microstructural features while eliminating the harmful metastable phases due to the general metastable fabrication methods. Here, we report a strategy to control the nano-scale features and simultaneously eliminate metastable phases for Nd2Fe14B/α-Fe nanocomposites through low-temperature pre-deformation of amorphous alloys combined with subsequent thermal annealing. The resultant bulk Nd2Fe14B/α-Fe nanostructure exhibits desired ultrafine grain sizes, ∼ 20 nm for soft-magnetic α-Fe phase with a high fraction of Vα-Fe ≈ 30 wt.% and ∼ 33 nm for hard-magnetic Nd2Fe14B phase. The desired microstructure results in a larger coercivity (Hci = 4.1 kOe) and higher saturation magnetization (Ms = 1.51 T) compared to those (Hci = 3.3 kOe and Ms = 1.35 T) of the counterpart without pre-deformation, contributing to a high energy density of 26.3 MGOe. This energy density is 200% larger than that of the counterpart without pre-deformation and far beyond that (around 20 MGOe) of previously reported bulk Nd2Fe14B/α-Fe nanocomposites with Vα-Fe ≥ 20 wt.%. The superior property stems from the purposely introduced low-temperature pre-deformation that changed the structure and local chemistry of the amorphous alloy, facilitating the decomposition of harmful metastable phases and the formation of Nd2Fe14B phase during annealing processes, which lowers the temperature, from 750 to 700 °C for producing the Nd2Fe14B/α-Fe nanostructure and thus yields ultrafine nanograins. These results demonstrate an effective means to prepare high-performance bulk Nd2Fe14B/α-Fe nanocomposite magnets.

Texturing For Bulk Alpha-Fe/Nd2fe14b Nanocomposites With Enhanced Magnetic Properties

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Bulk α-Fe/Nd2Fe14B nanocomposite magnets prepared by hot deformation of amorphous Nd10.5Fe82Cu 1.5B6

Bulk Anisotropic Nd2fe14b/Alpha-Fe Nanocomposite Magnets Prepared By Hot-Deformation Processing Of Amorphous Alloys

Bulk Alpha-Fe/Nd2fe14b Nanocomposite Magnets Prepared by the Phase Transition of Amorphous Nd9fe81co3nb1b6 under High Pressure

Effect of Thermomechanical Deformation on the Magnetic Anisotropy of Bulk Α-Fe/nd2fe14b Nanocomposite Magnets

Effects of Nd and Co on thermal stability of nanocomposite Nd2Fe14B/a-Fe magnets

Bulk Α-Fe/nd2fe14b Nanocomposite Magnets Produced by Severe Plastic Deformation Combined with Thermal Annealing

Bulk anisotropic nanocomposite magnets prepared by the thermo-mechanical processing of Nd3.6Pr5.4Fe83Co 3B5 with different microstructures

Bulk Anisotropic Nd2Fe14B/α-Fe Nanocomposite Magnet Prepared by Hot Rolling

Bulk anisotropic nanocomposite magnets prepared by the thermo-mechanical processing of Nd<sub>3.6</sub>Pr<sub>5.4</sub>Fe<sub>83</sub>Co<sub>3</sub>B<sub>5</sub>with different microstructures

Realizing Texture in Bulk Nanocrystalline Nd-Fe-B Magnet Via High-Stress Low-Temperature Rapid Deformation

Tuning Texture and Magnetic Properties of Bulk Pr2Fe14B/α-Fe Nanocomposite Magnets Via Cu Addition

Improvement of overall texture and magnetic properties in bulk hot-deformed Nd-Fe-B composite magnets by the design of macrostructure

Effect of Nd Content on Magnetic Properties and Microstructure of Nd_xFe_(90.5-x)Zr_(3.0)B_(6.5_)Nanocomposite Magnets with the Big Zr Content

Effect of Niobium on Microstructure and Magnetic Properties of Bulk Anisotropic NdFeB/α-Fe Nanocomposites

Preparation of Anisotropic Nd(Fe,Mo)(12)N-X Magnetic Materials by the Strip-Casting Technique

Tuning the Microstructure and Magnetic Properties of Bulk Nanocomposite Magnets with Large Strain Deformation

Texture and Magnetic Domain of Nanocomposite NdFeB Permanent Magnetic Alloys

Strong texture in nanograin bulk Nd-Fe-B magnets via slow plastic deformation at low temperatures

Pre-deformation Assisted Fabrication of Bulk Nd2Fe14B/α-Fe Nanocomposites with High Energy Density