Abstract:This work highlights the relationship between the preparation, crystallization behavior, microstructures, and mechanical properties of Cu-based bulk metallic glasses (BMGs) and their composites (BMGCs). (Cu47Zr45Al8)97.5Y1.5Nb in-situ BMGCs were prepared using isothermal annealing, and the experimental results indicate tunable mechanical properties of the alloys by processing parameter manipulation. The crystallinity of (Cu47Zr45Al8)97.5Y1.5Nb BMGCs increases with extended annealing temperature and time, while their phase transition with rising temperature follows Am (amorphous state) → Am + Cu10Zr7 →Am + Cu10Zr7 + AlCu2Zr + Al2Zr. Precipitation strengthening during annealing above 720 K (447 ºC) can enhance the alloy microhardness remarkably and achieve an optimum of 712 HV by annealing at 800 K (527 ºC) for 60 min. TEM results show that Cu10Zr7 with sizes of 12~15 nm precipitates out upon crystallization and thereby accounts for the superior compressive property. The alloy exhibits a fracture strength up to 2080 MPa after annealing at 680 K (407 ºC) for 30 min. Morphological observation of the fracture surface reveals a transition of fracture characteristics from the typical amorphous ductile manner to a brittle manner with further annealing. The investigation provides novel thoughts of BMGs processing for further performance improvement.

Bulk metallic glass composites ductilized by core–shell structured dual crystalline phases through controlled inoculation

Microstructural Tailoring and Improvement of Mechanical Properties in CuZr-based Bulk Metallic Glass Composites

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

A CuZr-based Bulk Metallic Glass Composite with Excellent Mechanical Properties by Optimizing Microstructure

Significant Plasticity Enhancement of Zrcu-Based Bulk Metallic Glass Composite Dispersed by in Situ and Ex Situ Ta Particles

Formation of CuZr-based Bulk Metallic Glass Composites Containing Nanometer-Scale B2-CuZr Phase Through Sub-Tg Annealing

Zr-Co-Al bulk metallic glass composites containing B2 ZrCo via rapid quenching and annealing

A Complex Multicomponent Bulk Metallic Glass/ultrafine-Nanocrystal Composite Fabricated under Industrial-Applicable Condition

Pronounced Ductility in CuZrAl Ternary Bulk Metallic Glass Composites with Optimized Microstructure Through Melt Adjustment

High Tensile Plasticity and Strength of a CuZr-based Bulk Metallic Glass Composite

Controlling the Mechanical Properties of Bulk Metallic Glasses by Superficial Dealloyed Layer

Ductile Bulk Metallic Glass by Controlling Structural Heterogeneities

Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases

Synthesis,structure and Mechanical Properties of Zr-Cu-based Bulk Metallic Glass Composites

Incorporation of ultrafine nanograins in Zr–Cu–Al–Ni–Co bulk metallic glass enabling significantly improved mechanical properties

Enhanced mechanical properties of Zr65Cu15Ni10Al10 bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

Formation of Cu–Zr–Al Bulk Metallic Glass Composites with Improved Tensile Properties

Microstructural percolation assisted breakthrough of trade-off between strength and ductility in CuZr-based metallic glass composites

Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing

Ductile Co-based Bulk Metallic Glass with Superhigh Strength and Excellent Soft Magnetic Properties Induced by Modulation of Structural Heterogeneity

Concurrently achieving strength-ductility combination and robust anti-wear performance in an in-situ high-entropy bulk metallic glass composite