Abstract:Ethylenediaminetetraacetic acid (EDTA) is widely employed as a chelating agent in the electroless nickel plating industry to form stable metal–organic complexes (e.g., Ni-EDTA). These metal–organic complexes cannot be removed from plating wastewaters by traditional treatments in a cost-effective way. While electrochemical advanced oxidation processes (EAOPs) have been utilized for the efficient degradation of Ni-EDTA at the anode, challenges remain in the simultaneous and effective recovery of nickel at the cathode. In this study, we investigate the efficacy of five cathode materials [i.e., carbon felt (CF), titanium plate, graphite plate (GP), copper plate, and stainless-steel plate] with respect to Ni recovery. The highest Ni removal efficiency of 81.6 ± 0.1% was achieved with the carbon felt cathode which was 30% higher than that of the titanium cathode (52.1 ± 1.4%) with the improvement in performance attributed to the higher rate of mass transport of Ni ions (CF: 4.3 ± 0.4 × 10–4 s–1 vs Ti: 1.8 ± 0.2 × 10–4 s–1) toward the nanowire structure of carbon felt and to the large surface area of the carbon felt cathode compared with the other cathodes. While the chemical composition of the deposits was independent of the cathodic material or structure, the morphology of deposition varied with the cathode material. The accumulated Ni on the carbon felt surface was successfully recovered either as a nickel salt solution by acid leaching or as high purity NiO by calcinating the Ni-loaded carbon felt cathode at over 800 °C. The performance of the regenerated carbon felt after acid leaching was comparable to that of the fresh cathode even after 10 cycles of use and regeneration via acid leaching with this result confirming the stability and reusability of the carbon felt material.

Simultaneous destruction of Nickel (II)-EDTA with TiO2/Ti film anode and electrodeposition of nickel ions on the cathode

Constructing Dimensionally Stable TiO2 Nanotube Arrays/sno2/ruo2 Anode Via Successive Electrodeposition for Efficient Electrocatalytic Oxidation of As(III)

Effective Anodic Sulfide Removal Catalyzed by Single Nickel Atoms on Nitrogen-Doped Graphene with Stainless Steel Substrate

In-situ fabrication of CNT/TiO 2 interpenetrating network film on nickel substrate by chemical vapour deposition and application in photoassisted water electrolysis

Treatment of Ni-EDTA containing wastewater by electrochemical degradation using Ti<SUP>3+</SUP> self-doped TiO<sub>2</sub> nanotube arrays anode

Treatment of Ni-EDTA containing wastewater by electrochemical degradation using Ti3+ self-doped TiO2 nanotube arrays anode

Dye wastewater treatment using self-made Nd doped Ti/SnO2-Sb electro-catalytic electrodes

Electrochemical Ni-EDTA degradation and Ni removal from electroless plating wastewaters using an innovative Ni-doped PbO2 anode: Optimization and mechanism

Electro-oxidation of Ni (II)-citrate complexes at BDD electrode and simultaneous recovery of metallic nickel by electrodeposition

Photoelectrocatalytic Oxidation of Cu(II)-EDTA at the TiO2 Electrode and Simultaneous Recovery of Cu(II) by Electrodeposition.

Approaches to Enhancing Cathodic Nickel Recovery from Ni-EDTA Containing Synthetic Wastewaters

Decomposition of Nickel(Ⅱ)-Ethylenediaminetetraacetic acid by Fenton-Like reaction over oxygen vacancies-based Cu-Doped Fe3O4@γ-Al2O3 catalyst: A synergy of oxidation and adsorption

Effect of calcination temperature on the properties of Ti/SnO2-Sb anode and its performance in Ni-EDTA electrochemical degradation

Efficient degradation and Ni recovery from Ni-EDTA wastewater by Ni/GAC electrodes

Fabrication and Characterization of Cu/Ti Bilayer Nanoelectrode for Electrochemical Denitrification

Simultaneous reduction of nitrate and oxidation of by-products using electrochemical method.

Photoelectrocatalytic Oxidation of Cu-cyanides and Cu-EDTA at TiO2 nanotube electrode

Decomplexation of Ni(II)-citrate and recovery of nickel from chelated nickel containing electroplating wastewater by peroxymonosulfate with nickel

High-efficiency Nickel Recovery from Spent Electroless Nickel Plating Solution: Effective Degradation of High-concentration Nickel Complexes to Form Nickel Ferrite Nanomaterial via Fe 3 O 4 Catalytic Oxidation

Recovery of nickel from electroless nickel plating wastewater based on the synergy of electrocatalytic oxidation and electrodeposition technology

Electrochemical Synthesis of Ni/TiO2 Composite Coatings from Deep Eutectic Solvent and Electrocatalytic Characteristics of Deposits