Abstract:Pool boiling heat transfer on horizontal metallic foam surface with crossing and single-directional V-shaped groove was experimentally investigated at atmospheric pressure using deionized saturated water as the working liquid. Boiling patterns were captured using a high speed camera. The porosity of studied copper foam was fixed as 0.95. Thirty test samples categorized into three groups were studied. The influences of crossing V-shaped groove array configuration, single-directional groove width, and number on the heat transfer performance were examined respectively for the three groups in turn. The boiling process was governed by combinational interaction of three major factors of bubble escaping resistance, heat transfer surface area, and capillary force. The exhibited heat transfer performance of the metallic foam depended on whichever of the above factors dominated the boiling progress. Almost all V-shaped grooves could enhance the pool boiling heat transfer compared with foam surface without grooves. The optimal groove array configuration corresponding to highest heat transfer coefficient was connected to its groove volume ratio which was the very transition point for the behavior of the dominant factor. The optimal volume ratio for crossing groove array was 7.76% at pore density of 100PPI and 5.84% at pore density of 130PPI. The effect of groove number was heavily dependent on foam thickness. The optimal groove width of 2mm was found for the three groove number values (1, 2, and 3). The boiling characteristics were illustrated with boiling patterns obtained from the high speed camera. The present study could aid enhanced boiling surface design of sintered porous surface.

Pool boiling heat transfer of open-celled metal foams with V-shaped grooves for high pore densities

Single-directional and crossing V-shaped groove effect on pool boiling heat transfer of metal foam with high pore density

Experimental Study of Pool Boiling Heat Transfer on Horizontal Metallic Foam Surface with Crossing and Single-Directional V-shaped Groove in Saturated Water

Material effect on pool boiling heat transfer of open-celled metal foams with low pore density

Pool Boiling Heat Transfer on Open-Celled Metallic Foam Sintered Surface under Saturation Condition

ICOPE-15-C130 Investigation on Pool Boiling Heat Transfer of Metal Foams with Gradient Pore Densities

Experimental study on pool boiling heat transfer in gradient metal foams

Numerical and Experimental Study of Pool Boiling Heat Transfer Mechanisms in V-shaped Grooved Porous Metals

EXPERIMENTAL STUDY OF POOL BOILING ON SURFACE OF METAL FOAM WITH OPEN CELLS

Experimental study of multilayer gradient copper foam effect on pool boiling heat transfer performance and gas-liquid behavior characteristics

Pore-scale Investigation on Flow Boiling Heat Transfer Mechanisms in Gradient Open-Cell Metal Foams by LBM

Pore-Scale Simulation on Pool Boiling Heat Transfer and Bubble Dynamics in Open-Cell Metal Foam by Lattice Boltzmann Method

Investigation of Bubble Behavior in Gradient Porous Media under Pool Boiling Conditions

Enhanced Boiling Heat Transfer by Gradient Porous Metals in Saturated Pure Water and Surfactant Solutions

Experimental Investigation on Pool Boiling Mechanism of Two-Level Gradient Metal Foams in Deionized Water, Aqueous Surfactant Solutions and Polymeric Additive Solutions

Experimental investigation on the influence of copper foam characteristics on pool boiling heat transfer

Experimental correlation for pool boiling heat transfer on metallic foam surface and bubble cluster growth behavior on grooved array foam surface

Pool boiling heat transfer enhancement using the micro-thick metallic foam surface in saturated water

Flow Boiling Heat Transfer in Horizontal Metal-Foam Tubes

Thickness Effect on Pool Boiling Heat Transfer of Trapezoid-Shaped Copper Foam Fins

Experimental study on pool boiling enhancement by unique designing of porous media with a wettability gradient