Abstract:Distilled water pool boiling experiments are conducted to investigate the effect of deposing silver nanoparticles via boiling-induced deposition method on porous foam covers on pool boiling performance and bubbles dynamic behavior. Two copper foams, named foam No. 1 (with 85% porosity and pore density of 30 PPI) and No. 2 (with 90% porosity and pore density of 40 PPI), are welded on copper specimens (Conical frustum) and then coated by silver nanoparticles using DZ nano-coolant nanofluid with a concentration of 25 mg/L. All the experiments are carried out at atmospheric pressure on both uncoated and nano-coated foams. The findings reveal that compared to a polished plain copper surface, uncoated foams No. 1 and No. 2 improve average boiling heat transfer coefficient by 58% and 86% and reduce wall superheat at ONB by 4.7 °C and 5.3 °C, respectively. However, due to the generation of more bubbles with smaller sizes and lower release periods on coated foams compared to uncoated ones, deposing nanoparticles on foam No. 1 and No. 2 contributes to further enhancements in heat transfer coefficients by 18% and 9% (at the best performance), respectively, and 0.3 °C further reduction in wall superheat at ONB. To evaluate the effectiveness of nanoparticle deposition on foam covers as a hybrid enhancement technique, the experimental results are compared with the results attained for nano-coated polished copper surface and also copper foam covers enhanced further by manipulating their wettability and macro-scale structure. The comparison results indicate that the coated foams perform better than the coated polished plain surfaces, notably at low heat fluxes. Also, the nanoparticle deposition on foam covers is seen to be of superior performance compared to the aforementioned hybrid enhancement techniques.

ICOPE-15-C130 Investigation on Pool Boiling Heat Transfer of Metal Foams with Gradient Pore Densities

Experimental study on pool boiling heat transfer in gradient metal foams

Enhanced Boiling Heat Transfer by Gradient Porous Metals in Saturated Pure Water and Surfactant Solutions

Experimental Investigation on Pool Boiling Mechanism of Two-Level Gradient Metal Foams in Deionized Water, Aqueous Surfactant Solutions and Polymeric Additive Solutions

Investigation of Bubble Behavior in Gradient Porous Media under Pool Boiling Conditions

Material effect on pool boiling heat transfer of open-celled metal foams with low pore density

Pool Boiling Heat Transfer on Open-Celled Metallic Foam Sintered Surface under Saturation Condition

Influences of Nanoparticles on Pool Boiling Heat Transfer in Porous Metals

Experimental investigation on the influence of copper foam characteristics on pool boiling heat transfer

Experimental Study of Pool Boiling Heat Transfer on Horizontal Metallic Foam Surface with Crossing and Single-Directional V-shaped Groove in Saturated Water

EXPERIMENTAL STUDY OF POOL BOILING ON SURFACE OF METAL FOAM WITH OPEN CELLS

Experimental study of multilayer gradient copper foam effect on pool boiling heat transfer performance and gas-liquid behavior characteristics

Single-directional and crossing V-shaped groove effect on pool boiling heat transfer of metal foam with high pore density

On the effect of silver nanoparticles deposition on porous copper foams on pool boiling heat transfer enhancement: an experimental visualization

Pore-scale Investigation on Flow Boiling Heat Transfer Mechanisms in Gradient Open-Cell Metal Foams by LBM

Experimental Study on Capillary Microflows in High Porosity Open-Cell Metal Foams

Pool boiling heat transfer of open-celled metal foams with V-shaped grooves for high pore densities

Experimental study on pool boiling enhancement by unique designing of porous media with a wettability gradient

Experimental correlation for pool boiling heat transfer on metallic foam surface and bubble cluster growth behavior on grooved array foam surface

Pore-scale Simulation of Forced Convection Heat Transfer in Metal Foams with Uniform and Gradient Structures

Experimental investigation of permeability and Darcy-Forchheimer flow transition in metal foam with high pore density