Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

TWO KINDS OF DUAL-BAND BANDPASS FILTER BASED ON A SINGLE SQUARE RING RESONATOR

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

An Extended Doublet Substrate Integrated Waveguide (SIW) Bandpass Filter with a Complementary Split Ring Resonator (CSRR)

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Dual-band bandpass filter using centrally coupled resonators (CCRs)

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Dual-Band Superconducting Bandpass Filter Using Stub-Loaded Resonators with Controllable Coupling and Feeding Structures

Novel Balanced Single/Dual-band Bandpass Filters Based on Circular Patch Resonator

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

A Fully Packaged Bandpass Filter on Stripline Patch Resonator With Wide Upper Stopband

Compact Quad-Band BPF Using Quad-Mode Stub Loaded Resonators

A Tunable Balanced Dual‐band BPF with Quasi‐independently Controlled Center Frequency and Bandwidth

Sharp-rejection dual ultra-wideband bandpass filter using sextuple mode resonator