Abstract:Strain rate played an important role in the forming process of metal and alloy. In the present work, the effect of strain rate on deformation behavior and microstructure evolution of thermal-rolled Inconel 625 superalloy were systematically investigated by plane-strain compression (PSC) test at 1000 °C, and the strain rate range changed from 1×10-3s-1 to 5 s-1. Obvious serrations occurred in strain rate range of 5 s-1 - 0.05 s-1 and transformed from type A to type A+B, and type B with decreasing of strain rate. Microscopic observations from transmission electron microscopy (TEM) indicated that type A and type B serration were related to slip bands nucleation-propagation, and carbon atoms-dislocations interaction, respectively. Electron backscatter diffraction (EBSD) technique and TEM were used to study the dynamic recrystallization (DRX) behavior during PSC. As the strain rates were greater than 5 s-1, DRX process was accelerated because of high deformed stored energy and adiabatic heating. This is undoubtedly a meaningful find to refine grain size and improve thermal processing efficiency. Discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX) have been confirmed to occur simultaneously during the deformation process, but CDRX played a minor role in DRX nucleation. Texture evolution characteristics were also related to strain rate. Nearly random texture distribution was obtained as the strain rate above 0.5 s-1. Obvious Cu, E, S and Cube textures appeared in the strain rate range of 0.1 s-1 - 10-2s-1. Grain orientations showed random distribution at the strain rate of 10-3s-1. Moreover, <001> direction should be considered as preferred crystallographic orientations to recrystallization nucleation.

Temperature And Strain Rate Sensitivity Of Ultrafine-Grained Copper Under Uniaxial Compression

Strain localization and ductile fracture mechanism of micro/mesoscale deformation in ultrafine-grained pure copper

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Constitutive Modelling of Plasticity of Fcc Metals under Extremely High Strain Rates

Grain Boundary Sliding and Strain Rate Sensitivity of Coarse and Fine/Ultrafine Grained 5083 Aluminum Alloys

Microstructures and mechanical properties of Cu-Sn alloy subjected to elevated-temperature heat deformation

Strain Compensation of the Constitutive Equation for High Temperature Flow Stress of a Al-Cu-Li Alloy

Strain-rate sensitivity maps and the estimation of ductility for low temperature superplasticity

Investigation of deformation behavior and strain-induced precipitations in Al-Zn-Mg-Cu alloys across a wide temperature range

Effect of Strain Rate and Temperature on Dynamic Mechanical Behavior and Microstructure Evolution of Ultra-High Strength Aluminum Alloy

A Dynamic Mechanical Analysis of T2 Copper at High Strain Rates

Serrated flow behavior and microstructure evolution of Inconel 625 superalloy during plane-strain compression with different strain rates

A mesoscale investigation of strain rate effect on dynamic deformation of single-crystal copper

The Portevin–Le Chatelier Effect of Cu–2.0Be Alloy during Hot Compression

Effect of strain on the stacking fault energy of copper: A first-principles study

Mechanical Response of Nano-Porous Copper under Different Temperature and Strain Rate Through Molecular Dynamics Simulations

Compressive deformation behavior of ultrafine-grained Mg-3Zn-1.2Ca-0.6Zr alloy at room temperature

Grain size effects on the compressibility and yield strength of copper

Strain hardening rate and strain rate sensitivity behavior of bcc/fcc-dual-phase tungsten heavy alloy

The mechanical response of commercially pure copper under multiaxial loading at low and high strain rates

Coupled Effects of High Temperature and Strain Rate on Compressive Properties of Hybrid Fiber UHTCC