Abstract:In this paper, we present the dynamic response of commercially pure copper subjected to combined tension-torsion loads representative of real case impact scenarios. Experiments were conducted both quasi statically, at a strain rate equal to 10−3 s−1, and dynamically at strain rates in the region between 500 s−1 and 1000 s−1. All high rate experiments were conducted using a novel Split Hopkinson Tension-Torsion Bar instrumented with high-speed photographic equipment. The dynamic combined loading experiments demonstrate the capability of the apparatus to generate longitudinal and torsional stress waves which are synchronised upon loading of the specimen. The presented data show that dynamic equilibrium conditions and nearly steady strain rates were achieved during the experiments. Additionally, the analyses of the loading paths show that nearly proportional strain loading was attained during testing.The measured experimental results illustrate, for the first time, the failure stress locus of the material over a wide range of stress states including pure torsion, shear-dominated combined tension-shear, tension-dominated combined tension-shear and plain tension. The quasi-static and dynamic failure envelopes are herein presented in the normal stress vs shear stress space to motivate the development of accurate and effective constitutive models. To conclude, the Drucker-Prager criterion was employed to approximate the failure loci and to assess the rate sensitivity of the material. A moderate asymmetry of the uniaxial ultimate stresses in tension and compression is predicted both at quasi-static and dynamic strain rates.

Mechanical Response of Nano-Porous Copper under Different Temperature and Strain Rate Through Molecular Dynamics Simulations

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Deformation of Nanoporous Copper Subjected to High-Rate Compression at Various Temperatures

MD Investigations for Mechanical Properties of Copper Nanowires with and Without Surface Defects

On the strain rate sensitivity of mechanical properties of nanoporous gold: Temperature effect

Scaling Laws and Mechanical Properties of Nanoporous Copper

Recent Findings on the Mechanical Responses of Nanostructures to Extreme Loading Conditions

Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials

Multiaxial Behavior of Nanoporous Single Crystal Copper: a Molecular Dynamics Study

Strain Rate Effect on Plastic Deformation of Nanocrystalline Copper Investigated by Molecular Dynamics

Molecular dynamics simulation on elastoplastic properties of the void expansion in nanocrystalline copper

Orientation-dependent plastic flow in nanoscratching of copper surfaces

Some Research Developments on Mechanical Property of Nanoporous Metals

EFFECTS OF SPECIMEN SIZE AND APLLIED STRAIN RATE ON THE PLASTIC FLOW OF FCC METALS

The mechanical response of commercially pure copper under multiaxial loading at low and high strain rates

The effects of strain rate and temperature on the deformation behavior of the single-crystal copper nanowire

Investigation of the mechanical responses of copper nanowires based on molecular dynamics and coarse-grained molecular dynamics

The Influence Mechanism of the Strain Rate on the Tensile Behavior of Copper Nanowire

The characterization of plastic behavior and mechanical properties in the gradient nanostructured copper

Molecular Dynamics Study on Mechanical Properties of Nanopolycrystalline Cu–Sn Alloy