Abstract:The performance of critical current density of GdBa2Cu3O7−δ (GdBCO or Gd123) superconductor bulk has an important influence on its practical applications. In this work, four single-domain GdBCO superconductor bulks were successfully processed by the modified top-seeded melt-texture growth method. The addition of a YBa2Cu3O7−δ (Y123) liquid source with different thicknesses, 0 mm (S0), 3 mm(S3), 5 mm (S5), 7 mm (S7), was introduced to study the influence on the superconducting properties. GdBCO bulk with the addition of the Y123 liquid source with a 3-mm thickness shows the best superconducting properties. The addition of the Y123 liquid source results in a decrease in the Gd3+ ion concentration required for Gd123 growth; thus, Gd2BaCuO5 (Gd211) particles in the liquid source need a larger self-decomposition to diffuse Gd3+ ions to Gd123 growth front, which refines the size and leads to a homogenous distribution of the Gd211 particles in the bulks. Thus, the more pinning centers of fined Gd211 particles improve the superconducting properties of GdBCO bulk. With increases in the thickness of Y123 liquid source to 5 mm and 7 mm, high RE3+ (Gd3+ and Y3+) concentration can coarsen Gd211 particles and fuse with Gd211 liquid source. The superconducting properties apparently drop. Therefore, the addition of a Y123 liquid source with a suitable thickness is a positive modification to obtain high-performance GdBCO bulk.

Thickness Dependence of Structural and Superconducting Properties of Single-Crystal-Like GdBCO Films Prepared by Photo-Assisted MOCVD

Thickness effect on pinning properties for GdBa2Cu3O7-x films deposited with RF sputtering

High Performance GdBa2Cu3O7− Film Preparation by Non-Fluorine Chemical Solution Deposition Approach

Microstructural characterization and superconducting properties of GdBa2Cu3O7-x films prepared by a fluorine-free sol-gel process

Thickness dependence of structural and superconducting properties of Co-doped BaFe2As2 coated conductors

Comprehensive study of epitaxial (Nd,Eu,Gd)Ba 2 Cu 3 O 7−δ films grown on textured templates

The Growth Mechanism and Topography of Superconducting YBa2Cu3O7−δ and BiSrCaCuO-2201 Films Studied by Scanning Tunneling Microscopy

Flux Pinning Properties of Single-Grain Bulk GdBCO Superconductors Processed by Different Thicknesses of Y123 Liquid Source

MOD multi-layer YBCO films on single-crystal substrate

Evolution of morphology and residual stress of GdBa2Cu3O7−δ/EuBa2Cu3O7−δ quasimultilayers

Thickness Effect of Gd2Zr2O7 Buffer Layer on Performance of YBa2Cu3O7−δ Coated Conductors

Systematic Studies on the Growth Process of Superconducting YBa2Cu3O7−δ and Bi2Sr2CuOy Thin Films by Scanning Tunneling Microscopy

Thickness Dependence of Critical Current Density in Mgb2 Films Fabricated by Hybrid Physical-Chemical Vapor Deposition

Fabrication And Analysis Of Tri-Layer Yba2cu3 O (7-Delta) Thick Films By Low-Fluorine Mod Method

Fabrication and Analysis of Tri-layer YBa2Cu3O7−δ Thick Films by Low-Fluorine MOD Method

Chemical Solution Deposition of YBCO Films with Gd Excess

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method

Microstructure of Epitaxial YBa2Cu3O7−δ Thin Films Grown on Pb(Mg1/3Nb2/3)0.7Ti0.3O3 Substrates

Phase purity and surface morphology of high-Jc superconducting Bi2Sr2Ca1Cu2O8+δ thin films

Thick $\Hbox{yba}_{2}\hbox{cu}_{3}\hbox{o}_{7-\Delta}$ Superconducting Films by Low-Fluorine Metallorganic Solution Deposition

Drastic improvement of surface structure and current-carrying ability in YBa2Cu3O7 films by introducing multilayered structure