Abstract:Micro-characterized variables are proposed to precisely characterize a micro-V-grooved Si surface through the 3D measured topography rather than the designed one. In this study, level and gradient micro-grooved surfaces with depth of 25-80 mu m were precisely and smoothly fabricated using a new micro-grinding process rather than laser machining and chemical etching. The objective is to investigate how these accurate micro-characterized variables systematically influence anisotropic wetting and droplet self-movement on such regular micro-structured surfaces without surface chemical modification. First, the anisotropic wetting, droplet sliding, pinning effect and droplet impact were experimentally investigated; then, theoretical anisotropic wetting models were constructed to predict and design the anisotropic wetting. The experiments show that the level micro-V-grooved surface produces the anisotropic wetting and pinning effects. It not only approximates superhydrophobicity but also produces high surface free energy. Moreover, the gradient micro-V-grooved surface with large pitch may lead to much easier droplet sliding than the level one along the micro-groove. The droplet self-movement trend increases with increasing the micro-groove gradient and micro-V-groove ratio. The micro-groove pitch and depth also influence the droplet impact. Theoretical analyses show that the wetting anisotropy and the droplet anisotropy both reach their largest value and disappear for a sharp micro-groove top when the micro-V-groove ratio is equal to 0.70 and 2.58, respectively, which may change the wetting between the composite state and the non-composite state. It is confirmed that the wetting behavior may be designed and predicted by the accurate micro-characterized variables of a regular micro-structured surface.

Improving hydrophobicity of laser textured SiC surface with micro-square convexes

Hydrophilic control of laser micro-square-convexes SiC surfaces

Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing

Hydrophobic texture screening of laser ablated silicon carbide surface and its influencing factors analysis and optimization

Anisotropic Wettability of Laser Micro-Grooved SiC Surfaces

Transient Spreading of Water Droplet on Laser Micro-Structured SiC Surfaces

Surface topography by water jet-guided laser texturing on wettability of monocrystalline silicon

Laser Textured Superhydrophobic SiC Ceramic Surface and the Performance of Condensation Heat Transfer

Wetting behavior of Al on the surface of SiC textured by nanosecond laser

Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

Fabricating physicochemical microstructures with super hydrophilicity on Cf/SiC composites surface via picosecond-laser induced ablation

Anisotropic wetting properties on a precision-ground micro-V-grooved Si surface related to their micro-characterized variables

Effect of picosecond laser texturing on the friction behavior of silicon carbide in hybrid ceramic bearings under dry and water lubrication

Comparison of structures and hydrophobicity of femtosecond and nanosecond laser-etched surfaces on silicon

Evaporation and wetting behavior of water on the laser-textured silicon substrate

Femtosecond laser modification of silicon carbide substrates and its influence on CMP process

Influence of surface morphology and processing parameters on polishing of silicon carbide ceramics using femtosecond laser pulses

DESIGN AND FABRICATION OF SUPER-HYDROPHOBIC SURFACES ON SILICON WAFERS AND STUDY OF EFFECTS TO HYDROPHOBICITY

Surface characteristics and wettability of superhydrophobic silanized inorganic glass coating surfaces textured with a picosecond laser

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face

Laser-induced gradient microstrcutres on Si3N4 ceramics and their wettability analysis