Abstract:We have thoroughly clarified the mesoscopic nature of serration behavior in a high-Mn austenitic steel in connection with its characteristic localized deformation. A typical high-Mn steel, Fe-22Mn-0.6C (wt. %), with a face centered cubic (FCC) single-phase structure was used in the present study. After 4 cycles of repeated cold-rolling and annealing process, a specimen with a fully recrystallized microstructure having a mean grain size of 2.0 μm was obtained. The specimen was tensile tested at room temperature at an initial strain rate of 8.3 ✗ 10−4 s−1, during which the digital image correlation (DIC) technique was applied for analyzing local strain and strain-rate distributions in the specimen. Obtained results indicated that a unique strain localization behavior characterized by the formation, propagation and annihilation of deformation localized bands, so-called Portevin–Le Chatelier (PLC) bands, determined the global mechanical response appearing as serration on the stress-strain curve. In addition, the in-situ synchrotron XRD diffraction during the tensile test was utilized to understand what was happening in the material with respect to the PLC banding. Lattice strain of (200) plane nearly perpendicular to the tensile direction dropped when every PLC band passed through the beam position, which indicated a stress relaxation occurred inside the PLC band. At the same time, the dislocation density increased drastically when the PLC band passed the beam position, which described that the material was plastically deformed and work-hardened mostly within the PLC band. All the results obtained consistently explained the serration behavior in a mesoscopic scale. The serration behavior on the stress-strain curve totally corresponded to the formation, propagation and annihilation of the PLC band in the 22Mn-0.6C steel, and the localized deformation, i.e., the PLC banding, governed the characteristic strain hardening of the material.

Abnormal room temperature serrated flow and strain rate dependence of critical strain of a Fe-Mn-C twin-induced plasticity steel

Experimental Analysis of the Piezomagnetic Properties of Ferromagnetic Steels Subjected to Cyclic Tensile Stress

Dynamic strain ageing in a twin-induced plasticity steel

Unusual Grain-Size and Strain-Rate Effects on the Serrated Flow in Femnc Twin-Induced Plasticity Steels

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Serrated Flow and Failure Behaviors of a Hadfield Steel at Various Strain Rates under Extensometer-Measured Strain Control Tensile Load

Serrated Flow Behavior of 11Cr3W3Co Steel during Tension at Different Temperatures

Cracking in a Fe–25Mn–3Si–3Al Steel

Serrated Flow in an 11cr Ferritic/Martensitic Steel

Effect of grain size on dynamic strain aging behavior of C-bearing high Mn twinning-induced plasticity steel

Dynamic strain aging and serrated flow behavior of Cr-Ti-B low carbon steel during warm deformation

On the Tensile Behavior of High-Manganese Twinning-Induced Plasticity Steel

Strain rate-dependent hardening with dislocation-twin interaction of Fe–Mn–Al–C steel using crystal plasticity

The Tensile Properties and Serrated Flow Behavior of A Thermomechanically Treated Cocrfenimn High-Entropy Alloy

Unusual grain-size effects on tensile deformation behavior of twinning-induced plasticity steel with low Mn content

Deformation Behavior and Microstructure of Low Carbon High Manganese Steels in Tensile Strain

A flow model in CoCrFeMnNi high-entropy alloys during high-temperature tension

Mesoscopic nature of serration behavior in high-Mn austenitic steel

Effect of Temperature on Microstructure and Deformation Mechanism of Fe-30Mn-3Si-4Al TWIP Steel at Strain Rate of 700 S-~

The tensile properties and microstructure evolution of cold-rolled Fe–Mn–C TWIP steels with different carbon contents

Analysis of Plastic Deformation Instabilities at Elevated Temperatures in Hot-Rolled Medium-Mn Steel