Abstract:To reduce the pressure drop of diesel particulate filter (DPF) as well as improve its collection efficiency. A mathematical model of DPF pressure drop and capture efficiency was established. This research systematically investigates the effects of channels per square inch (CPSI), wall thickness, and carrier ratio on DPF performance through grey relational analysis (GRA) and polynomial approximation algorithm (PAA). The findings reveal that DPF exhibits lower pressure drop and higher collection efficiency in the case where the carrier ratio, wall thickness, and CPSI are within the ranges of 1.40 to 1.53, 9.8 to 10.5 mil, and 200 to 300, respectively. Particularly, at a carrier ratio of 1.52 and a wall thickness of 10.38 mil, the pressure drop reaches a minimum value of 4.23 kPa, with a collection efficiency of 90.28%. Meanwhile, at a carrier ratio of 1.52 and a CPSI of 200, the pressure drop reaches a minimum value of 4.17 kPa, with a collection efficiency of 90.21%. The model expressions for pressure drop and collection efficiency derived from the PAA are: y1=51.19+3.815x1−8.726x2+3.794x12−1.735x1x2+0.524x22 , and y2=0.383+0.105x1+0.085x2+0.032x12−0.016x1x2−0.0032x22 . The foregoing models exhibit excellent predictive accuracy and goodness of fit for the DPF performance. Under the interactive influence of carrier ratio and wall thickness, the root mean square errors (RMSE) for pressure drop and collection efficiency are 0.0110 and 0.0002, respectively, with corresponding goodness of fit values of 0.9996 and 0.9985. As revealed by the GRA results, wall thickness exerts the most significant impact on DPF performance, presenting a GRG of 0.84 for filtration efficiency and 0.79 for pressure drop. The overall influence on both collection efficiency and pressure drop follows the descending order: wall thickness > carrier ratio > CPSI. This work has important engineering significance for optimizing the DPF capture performance and extending its working time.

Grey relational analysis on influencing factors of muffling characteristic in a radial rotatable diesel particulate filter

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

Numerical Simulation and Structure Optimization of Compressor Muffler

Numerical Analysis on Acoustic Characteristics of Automotive Exhaust Muffler by Transfer Matrix Method

Numerical Analysis and Structure Improvement of Automotive Exhaust Muffler's Acoustic Characteristics

Effect of structural parameters on diesel particulate filter trapping performance of heavy-duty diesel engines based on grey correlation analysis

Effects of structural parameters on transmission loss of diesel engine muffler and analysis of prominent structural parameters

Structural Performance Analysis and Optimization of Small Diesel Engine Exhaust Muffler

Research on the Influence of Characteristics of the Annular Connecting Pipe on the Transmission Loss of the Expanded Exhaust Muffler

Theoretical Study on a Water Muffler

Numerical simulation of diesel particulate filter flow characteristics optimization: From the perspective of pore structure parameters and inlet velocity

Simulation and test of flow process in air filter

Lumped model for evaluating dynamic filtration and pressure drop behaviour in diesel particulate filters

Analysis of coupling effect between chambers of reactive muffler

Effects of carrier structure parameters on diesel particulate filter capture performance based on grey relational analysis

Local Structural Optimization Method Based on Orthogonal Analysis for a Resistant Muffler

Numerical simulation and test validation for performance of a muffler in an exhaust pipe

Acoustic Performance of A Water Muffler

Analysis on characteristics of new muffler for marine pipelines

Investigation of Multi-Degree of Freedom Damped Dynamic Absorber Applied to Wheel Noise Control