Abstract:A resistant muffler is the most direct and effective means of reducing exhaust noise from earthmoving equipment. Different types of construction machinery require different mufflers. Current muffler design is mostly experience-based, and there are blind spots in the design process. The optimization scheme must constantly be revised to achieve satisfactory noise reduction. The use of a large number of optimization schemes are wasteful in terms of both cost and time. Therefore, an effective and time-saving design method for muffler optimization is needed. An optimization approach, known as the "local structural optimization method for a resistant muffler", based on orthogonal analysis is proposed in this study to optimize the design of a resistant muffler with a complex structure. The results of an orthogonal analysis for a simulation of the muffler structure show that the muffler acoustic and aerodynamic performances are affected by the inlet pipe, outlet pipe, insertion pipe, cross-flow perforated pipe and other local structures, and the results are employed to determine the influence law for the transmission loss (TL) and the exhaust back pressure, considering the local structural parameters of the muffler. The method is applied to optimize the design of a muffler suitable for an excavator and verified by performing an installation test. The experimental results show that the improved designs reduces the exhaust noise by 5 dB and the exhaust back pressure by 0.6 kPa. The improved designs exhibit higher aerodynamic and acoustic performances than a muffler prototype, showing that the proposed method is accurate, effective and reliable. The proposed method considerably simplifies the design process and saves time and cost. This method provides theoretical guidance and an optimization process for the design of a muffler for construction machinery.

Effects of structural parameters on transmission loss of diesel engine muffler and analysis of prominent structural parameters

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

Numerical Analysis on Acoustic Characteristics of Automotive Exhaust Muffler by Transfer Matrix Method

Numerical Analysis and Structure Improvement of Automotive Exhaust Muffler's Acoustic Characteristics

Numerical Simulation and Structure Optimization of Compressor Muffler

Modal Analysis and Structure Design for Hydraulic Muffler

Research on the Influence of Characteristics of the Annular Connecting Pipe on the Transmission Loss of the Expanded Exhaust Muffler

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

Numerical simulation and test validation for performance of a muffler in an exhaust pipe

Transmission Loss Analysis of Thick Perforated Plates for Valve Contained Pipelines

Structural Performance Analysis and Optimization of Small Diesel Engine Exhaust Muffler

Theoretical Study on a Water Muffler

Simulation and Improvement of Silencer at Turbocharger Outlet

Sensitivity analysis and noise reduction optimization design of the insert-pipe double expansion chamber muffler

Analysis of coupling effect between chambers of reactive muffler

A Computational Fluid Dynamics Approach for Full Characterization of Muffler Without and with Exhaust Flow

Local Structural Optimization Method Based on Orthogonal Analysis for a Resistant Muffler

Theoretical and Experimental Study on the Transmission Loss of a Side Outlet Muffler

Influence of perforation and sound-absorbing material filling on acoustic attenuation performance of three-pass perforated mufflers

Study on the Acoustic Performance of Perforated Duct Muffler

Research on relation among inlet/outlet pressure, pressure loss and inlet velocity of a complex resistance muffler