Abstract:Fouling, encrustation, and lack of polymorphic form control are some of the major drawbacks of continuous oscillatory baffled crystallizers (COBCs), which can lead to clogging, undesired crystal form generation, and process failure. To counter these drawbacks, seeding with crystals is a methodology to not only control nucleation mechanism and crystal size distribution (CSD) but also provide polymorphic form control. Consistent manual preparation of seeds for continuous crystallization is labor-intensive and often economically infeasible. Furthermore, any fluctuations of seed quality can impact the startup dynamics. In this work, a proof-of-concept and the benefits of continuous in situ seed generation was demonstrated with an integration of a mixed suspension mixed product removal (MSMPR) crystallizer with a COBC via a continuous combined cooling antisolvent crystallization (CCAC). First, a CCAC solubility design space of metastable (form II) and stable forms (form I) of ortho-aminobenzoic acid was developed to identify operating regimes for selective polymorphic form generation. Second, the in situ form I seed generation experiments, with the COBC, prolonged steady-state generation of the crystal product for more than eight residence times. The crystal product generated from the combined system with segmented cooling had a higher mean size and narrower size distribution when compared to the product obtained from a single-stage MSMPR experiment. Polymorphic control coupled with continuous seed generation in the combined system generated a uniform crystal product with no seed wash out occurring. Lastly, the importance of the method of slurry transport for the combined system was highlighted in experiments utilizing mechanical pump transfer compared to gravimetric transfer. Overall, these proof-of-concept experiments demonstrated the feasibility and benefits of using the integrated MSMPR–COBC crystallization system, utilizing the MSMPR crystallizer for continuous in situ seed generation providing for the robust operation of the COBCs.

Selection and modification of seed crystals in induced crystallization process

Optimizing Protein Crystal Growth Through Dynamic Seeding

Copper Removal by Induced Crystallization from Copper-Containing Wastewater

Effects of Alkyl Ether Amine and Calcium Ions on Fine Quartz Flotation and Its Guidance for Upgrading Vanadium from Stone Coal

Recovery of Cu(II) from Aqueous Solution by Induced Crystallization in a Long-Term Operation

Seeding Techniques and Optimization of Solution Crystallization Processes

Elucidating the impacts of initial supersaturation and seed crystal loading on struvite precipitation kinetics, fines production, and crystal growth

Effect of Nucleation Modes on the Induced Crystallization Process for Copper Contained Wastewater Treatment

Enhancement of KCl flotation through crystallization regulation during Carnallite decomposition

Seeding Condition Strategy for Mitigating the Scale Formation and Enhancing the Yield in Suspension-Type Cooling Crystallization

Influences of Seeds on the Properties of Zeolite NaA Membranes on Alumina Hollow Fibers

Influence of Seed Crystal and Modifier on the Morphology of α-calcium Sulfate Hemihydrate Prepared by Salt Solution Method in Pilot Scale

Crystallization Fouling on Different Surfaces under Static and Dynamic Experiments

Membrane-Assisted Cooling Crystallization for Interfacial Nucleation Induction and Self-Seeding Control

Combing Seeding Crystallization with Flotation for Recovery of Fluorine from Wastewater: Experimental and Molecular Simulation Studies

Adding Crystals To Minimize Clogging in Continuous Flow Synthesis

OPERATION PERFORMANCE OF INDUCED CRYSTALLIZATION REACTOR

Continuous In Situ Seed Generation through the Integration of a Mixed Suspension Mixed Product Removal and an Oscillatory Baffled Crystallizer for the Control of Crystal Size Distribution and Polymorphic Form

Development of Artificial Seed Crystal for Crystallization of Calcium Phosphate

Optimization of Calcium Fluoride Crystallization Process for Treatment of High-Concentration Fluoride-Containing Semiconductor Industry Wastewater

Highly efficient recovery of Zn2+/Cu2+ from water by using hydrotalcite as crystal seeds