Abstract:The mixture of copper and iron often results in materials with favorable properties. The material production processes involving these metals including electroplating produce hazardous wastewater. In this study, the Fluidized Bed Homogeneous Crystallization (FBHC) process was applied to treat iron and copper-containing wastewater. The initial iron copper particles were successfully recovered from synthetic wastewater with [Fe]0:[Cu]0 of 2:1, the total metal concentration of 3 mM, at effluent pH = 7.75 ± 0.75, with the upflow velocity (U) of 1.76 m/h. The agglomerates hardening process is a crucial step for initial particle synthesis. The SEM analysis reveals the spherical particle's densified crust and porous core. The particle formation mechanism which includes the formation of the nucleus, attachment of precipitate flakes, and densification of particles was proposed after microscopic observation. The initial particles synthesized were used to initiate the treatment of synthetic wastewater at the operating condition pH = 7.75 ± 0.5, [Fe]0:[Cu]0 of 2:1, the total metal concentration of 3 mM, [CO32-]0:[M]0 = 1.2:1, and U of 28.66 m/h which results in the total metal removal of 99% and crystallization ratio of 90% and 88% for iron and copper respectively. The conditions were then applied to treat electroplating wastewater and resulted in the total metal removal of 99% for both iron and copper and a crystallization ratio of 83% and 79% for iron and copper, respectively. The treatment provided advantages in terms of treating larger amounts of sludge while eliminating the need to provide seed thus yielding a higher purity of product.

Recovery of Cu(II) from Aqueous Solution by Induced Crystallization in a Long-Term Operation

Copper Removal by Induced Crystallization from Copper-Containing Wastewater

Copper Wastewater Treatment with High Concentration in a Two-Stage Crystallization-Based Combined Process

Copper recovery from treatment of simulated copper-iron wastewater using fluidized-bed homogeneous crystallization technology

OPERATION PERFORMANCE OF INDUCED CRYSTALLIZATION REACTOR

Application of fluidized bed homogeneous crystallization for simultaneous recovery of Fe(II) and Cu(II) as particles from wastewater

A Study of Treating Copper Containing Wastewater by a Crystallization-Filtration Combined Process

Selection and modification of seed crystals in induced crystallization process

Removal of Ferrous from the Wastewater with High-Concentration Heavy Metal by Induced Crystallization

Recovery of Copper from Printed Circuit Board (PCB) Acidic Etching Wastewater: Ammonia Regulates the Crystallization of High Valued Copper Salt

Process Intensification for Enhanced Fluoride Removal and Recovery as Calcium Fluoride Using a Fluidized Bed Reactor

In-situ Cu(II) Enrichment and Recovery from Low-Strength Copper-Laden Wastewater Using a Novel Electrically Enhanced Microbial Copper Recovery Cell (MCRC)

Recycling Cu(II) from complexing copper wastewater using ferrous sulfide stabilized by carboxymethyl cellulose: efficiency and mechanism insights

Separation and Recovery of Cr(Iii) and Cr(Vi) Using Electrodeionization As an Efficient Approach

Effect of Nucleation Modes on the Induced Crystallization Process for Copper Contained Wastewater Treatment

Effective removal and selective capture of copper from salty solution in flow electrode capacitive deionization

Resource recovery treatment of an acidic resin regenerant containing Cu2+ using diffusion dialysis and electrodeposition

RECOVERY OF CHROMIUMLON ION USING HYBRID LIQUID MEMBRANE TECHNOLOGY FROM PLATING WASTEWATER

Optimization of Calcium Fluoride Crystallization Process for Treatment of High-Concentration Fluoride-Containing Semiconductor Industry Wastewater

A Promising Treatment Method for Cr(VI) Detoxification and Recovery by Coupling Fe0/Fe3C/C Fine Powders and Circulating Fluidized Bed

Treatment of synthetic zinc and nickel wastewater and identification of its crystallization products by Fluidized Bed Homogeneous Crystallization Technology