Abstract:Copper wastewater from industry is detrimental to plants and environment. There are some problems in the aspects of high efficiency and energy saving during treatment of wastewater. In present work, the novel double iron electrodes technique of pulse-alternating current was applied to flocculate copper in wastewater. The process parameters of the copper removal in wastewater were studied in the developed electrochemical reactors. Scanning electron microscopy, X-ray diffraction, and energy-dispersive spectroscopy were used to characterize the electrocoagulations. The copper residue in the effluent was measured by UV spectrophotometry. The adsorption mechanism was described through the isothermal adsorption curves of copper during flocculation processes. The simulated wastewater containing 100 mg dm-3 Cu2+ and 100 mg dm-3 NaCl as conductive salt was adjusted to pH 7.8-8 with ammonia or sulfuric acid. At room temperature of 20-25 °C, controlling the flow rate of 3 dm3 min-1, and applying pulse-alternating current of 40 μA gFe-1, the copper residue in the effluent passing through four-series reactors was reduced to 0.118 mg dm-3, which was far lower than 0.3 mg dm-3 (from GB20900-2008). The removal rate of copper could reach 99.882%. The removal of copper in the wastewater treated via our electrocoagulation technique was far more efficient than the conventional DC current coagulation and chemical flocculation. The double iron electrodes were used to reduce the concentration polarization and improved the current efficiency. The significant economic and good social benefit will be promisingly produced if our developed technique is applied in the treatment of industrial wastewater.

OPERATION PERFORMANCE OF INDUCED CRYSTALLIZATION REACTOR

Copper Removal by Induced Crystallization from Copper-Containing Wastewater

Recovery of Cu(II) from Aqueous Solution by Induced Crystallization in a Long-Term Operation

Phosphorus removal and recovery from wastewater by highly efficient struvite crystallization in an improved fluidized bed reactor

Stable Operating Range and Solids Residence Time of Fine Fluorite Particles in the Two-Stage Fluidized Bed

Advanced Progress in Treatment and Resource Utilization of Copper Containing Wastewater

Effect of Nucleation Modes on the Induced Crystallization Process for Copper Contained Wastewater Treatment

Copper recovery from treatment of simulated copper-iron wastewater using fluidized-bed homogeneous crystallization technology

Process Intensification for Enhanced Fluoride Removal and Recovery as Calcium Fluoride Using a Fluidized Bed Reactor

Treatment of synthetic zinc and nickel wastewater and identification of its crystallization products by Fluidized Bed Homogeneous Crystallization Technology

Numerical simulation of struvite crystallization in fluidized bed reactor

Selection and modification of seed crystals in induced crystallization process

Improvement of Inner Components in Biological Fluidized Bed Reactors for Wastewater Treatment

Effect Of Operation Conditions On Vacuum Membrane Distillation Performance For Epoxy Resin Wastewater

Optimizing induced struvite crystallization in a fluidized bed reactor for low-strength ammonium wastewater treatment

Performance of an Internal Circulating Three-Phase Fluidized Bed Bioreactor in Treating Petrochemical Wastewater

Highly efficient and energy-conserved flocculation of copper in wastewater by pulse-alternating current

Development and simulation of a struvite crystallization fluidized bed reactor with enhanced external recirculation for phosphorous and ammonium recovery

Study on batch biological treatment of refinery wastewater in a fluidized bed

Application of Liquid Solid Semi-Moving Bed to Fractionation of Cesium Ion in Wastewater

Optimization of Calcium Fluoride Crystallization Process for Treatment of High-Concentration Fluoride-Containing Semiconductor Industry Wastewater