Abstract:Synthesizing uniform microcrystals of high solid purity is desired for process efficiency and product consistency, but it is often challenging to achieve due to its high uniformity (e.g., the coefficient of variation in both crystal size and aspect ratio is less than 0.5) and mild reaction conditions (e.g., pH ∼ 7, room temperature). An example crystal is α-MnC2O4·2H2O, whose current precipitation synthesis often takes place in stirred-tank reactors and requires acidic pH, elevated temperatures, and/or extended hours. Crystal size uniformity control is also lacking. This study first demonstrates the feasibility of mild reaction conditions for synthesizing α-MnC2O4·2H2O in a stirred tank, at a stoichiometric ratio of 1:1 and an initial supersaturation of 7.5. This synthesis follows an indirect pathway, with a solid MnC2O4·3H2O (less-stable form) quickly precipitated first and then slowly transformed in slurry to α-MnC2O4·2H2O (conglomerates). Further, a new direct solution-precipitation pathway to obtaining pure α-MnC2O4·2H2O was discovered (without ever going through solid MnC2O4·3H2O and hour-long conversion) by replacing the “by-default” stirred tank/flask in the current synthesis with tubular slug flow at medium gas flow rates (e.g., 1.5–2.5 mL/min). With reduced gas flow rates in slug flow (from 10 to 1.5 mL/min), the induction time monotonically increases (from ∼50 to 137 s) and the mass portion of the undesired MnC2O4·3H2O among the reaction product solids also reduces (from ∼40 to 0%). Compared to a stirred tank at the same mild reaction conditions aimed at producing pure α-MnC2O4·2H2O, slug flow is able to reduce the reaction residence time from ∼30 to 0.3 h. The modular slug-flow design also allows not only incorporating production-cleaning cycles to prevent fouling but also scaling up the total volume using the same equipment. Throughout the continuous operation of 10 cycles (∼80 min) at medium gas flow rates, the product crystals from an initial supersaturation of 7.5 are consistently pure α-MnC2O4·2H2O, uniform in size (average length ∼14 μm, coefficient of variation less than 0.2), and are all in prism shape (average aspect ratio ∼1.4, coefficient of variation less than 0.25).

Adding Crystals To Minimize Clogging in Continuous Flow Synthesis

Synthesis of Colloidal Metal Nanocrystals in Droplet Reactors: the Pros and Cons of Interfacial Adsorption.

Optimizing Protein Crystal Growth Through Dynamic Seeding

Continuous In Situ Seed Generation through the Integration of a Mixed Suspension Mixed Product Removal and an Oscillatory Baffled Crystallizer for the Control of Crystal Size Distribution and Polymorphic Form

Solvent-Mediated Enhancement of Additive-Controlled Crystallization

When solids stop flow chemistry in commercial tubing

Continuous Production of Water‐Soluble Nanocrystals Through Anti‐Solvent Precipitation in a Fluidic Device

Use of Wet Milling Combined with Temperature Cycling to Minimize Crystal Agglomeration in a Sequential Antisolvent-Cooling Crystallization

Intensified Solid-State Transformation During Anti-Solvent Cocrystallization in Flow

A general and facile strategy for precisely controlling the crystal size of monodispersed metal-organic frameworks via separating the nucleation and growth.

Seeding Techniques and Optimization of Solution Crystallization Processes

Preparation of inorganic salt particles by reactive crystallization in an annular swirling flow reactor

>>On demand<< triggered crystallization of CaCO3 from solute precursor species

Kinetic Properties of Solventing out Crystallization of Ammonium Bicarbonate in a Novel Ammonia Carbon Capture System

Additive controlled crystallization

Direct Precipitation Pathway to Pure α-MnC 2 O 4 ·2H 2 O Using Slug Flow toward the Scalable Nonfouling Fast Synthesis of Uniform Microcrystals

Utilization of Charged Microdroplets for the Controlled Rapid Synthesis of Hollow Sodium Chloride Single Crystals

Crystallization-Induced Liquid Gate for Tunable Gas Flow Control

Direct observation and control of non-classical crystallization pathways in binary colloidal systems

Continuous Crystallization Using Ultrasound Assisted Nucleation, Cubic Cooling Profiles and Oscillatory Flow

Seeding Condition Strategy for Mitigating the Scale Formation and Enhancing the Yield in Suspension-Type Cooling Crystallization