Abstract:The resource recycling of flue gas pollution is the developing direction of exhaust pollutant treatment. In order to explore the feasibility of the direct electrolysis process for resource recycling of the absorption solution from the ammonia-based wet desulfurization and denitrification, the effect of electrolyte compositions and concentrations, temperature, current densities, flow rate, electrolytic time and impurities of absorption on current efficiency of persulfate production were investigated in a two-compartment electrolytic cell under batch recirculation. The experimental results indicated that urea and ammonia has inhibitory effect on current efficiency, while ammonium sulfite and nitrite existing in anode chamber showed no significant influence on current efficiency. The current efficiency of simulated absorbent solution decreased to 69.88％, which was much lower than 86.98％ by the pure ammonium sulfate electrolysis process under the optimal condition. Therefore, necessary pretreatments for the absorption solution, which contained the removal of heavy metal ions and urea, the oxidation of sulfite and the adjustment of pH, must be adopted before entering the electrolysis system. Using the pretreated absorption solution, the current efficiency could reach to 85.12％. The electrolytic reactor could effectively produce persulfate in anodic chamber and hydrogen by-product in cathodic chamber at the same time. Furthermore, the remainder solution after crystallization could be coupled with circulation absorption solution, and thus improving the denitrification efficiency. Therefore, it is a novel environmentally effective technology for flue gas cleaning with great prospects for development.

Oxidation of ammonium sulfite using multi-needle-to-plate negative dc corona discharge reactor

A Pilot Investigation on Oxidation of Ammonium Sulfite by Streamer Corona Plasma

Oxidation Of Ammonium Sulfite By A Multi-Needle-To-Plate Gas Phase Pulsed Corona Discharge Reactor

Streamer Plasma Induced Ammonia Flue Gas Desulfurization

A Semi-Wet Technological Process for Flue Gas Desulfurization by Corona Discharges at an Industrial Scale

Oxidation of ammonium sulfite in aqueous solutions using surface discharge

Heterogeneous Reactions in Non-Thermal Plasma Flue Gas Desulfurization

Oxidation of High Concentration Sulfites by Gas Discharge

Oxidation of Ammonium Sulfite in Aqueous Solutions Using Ozone Technology

Oxidation of Ammonium Sulfite in Aqueous Solutions with Streamer Plasmas

Effect of Air Factors on the Oxidation of Ammonium Sulfite with Reactive Oxygen Species Produced in a Gas-phase Surface Discharge Reactor

Electrochemical Oxidation of Ammonium Nitrite in Absorption Solution of Flue Gas

Experimental and kinetics of the oxidation of ammonium sulfite by hydrogen peroxide in ammonia flue gas desulfurization

Study on ozone generation from H2S and NH3 removal by pulsed corona discharge

Experimental investigation on activating water vapor and ammonia by DC corona discharge radical shower technology for removal of SO2 from flue gases

Sulfite Oxidation in Seawater Flue Gas Desulfurization by Plate Falling Film Corona-Streamer Discharge

Gas–liquid Absorption Reaction Between (NH4)2SO3 Solution and SO2 for Ammonia-Based Wet Flue Gas Desulfurization

Study of oxidation of calcium sulfite in flue gas desulfurization by pore-type surface dielectric barrier discharge

Simultaneous Removal Of So2 And Nox From Sintering Flue Gas Using Ammonia-Fe(Ii) Edta Combined With Electrolytic Regeneration

Electrochemical production of ammonium persulfate using absorption solution from ammonia-based wet desulfurization and denitrification

Generation of Reactive Oxygen Species by Surface Discharge Plasma for Enhancing the Oxidation of Ammonium Sulfite