Abstract:The present study investigated the effect of cooling rate on the microstructure and mechanical properties of sand casting Mg–10Gd–3Y–0.5Zr alloy with a cooling rate range of 0.7–3.6°C/s. When the cooling rate was increased, the average grain size of α-Mg decreased from 59μm to 39μm, the volume fraction of the second phase increased from 17.6% to 24.5%, and the eutectic compound exhibited continuous network instead of coarsening discontinuous network of plate-shaped microstructure. Energy-dispersive X-ray test results suggested that solute content of RE elements (Gd and Y) was low within the area near the grain boundary of α-Mg with high cooling rate, and solid-solution reaction occurred in the sand casting process. In addition, Vickers hardness (HV) testing indicated that HV increased with the increasing cooling rate, and the volume fraction of second phase (V) played a main role in hardness of the alloys. There was a linear relationship between them, the fitting function was HV=1.25V+63.05, R2=0.9989. Tensile strength test showed that both of ultimate tensile strength (UTS) and tensile yield strength (TYS) first increased and then decreased with the increasing cooling rate. Based on fracture observations, the types of fracture surface characteristics are correspondingly classified into three modes, transgranular, dimple-like fracture and intergranular fracture with the increasing cooling rate.

The Effect of Cooling Rate on Microstructure and Mechanical Properties of Zr-Based Bulk Metallic Glasses

Cooling rate effects on the microstructure and phase formation in Zr51Cu20.7Ni12Al16.3 bulk metallic glass

Cooling Rate Effects on the Microstructure and Phase Formation in Zr51Cu20.7Ni12Al16.3bulk Metallic Glass

Cooling Rate Dependent As-Cast Microstructure and Mechanical Properties of Zr-based Metallic Glasses

The Effect of Cooling Rate on Microstructure and Mechanical Properties of the Zr-4Hf-3Nb (wt%) Alloy

Effect of Cooling Rate on the Bending Plasticity of Zr55Al10Ni5Cu30 Bulk Metallic Glass

The Effect of Cooling Rate on the Microstructure and Mechanical Properties of Mg–Zn–Gd-based Alloys

Effect of the cooling rate on plastic deformability of a Zr-based bulk metallic glass

Microstructures and Tensile Properties of CuZrAlNb Metallic Glass Composites under Different Cooling Rates

Effect of cooling rate on microstructure and mechanical properties of Mg-9Gd-4Y-1Zn-1Al alloy

The Effect of Cooling Rate on the Wear Performance of a ZrCuAlAg Bulk Metallic Glass

The Effect of Annealing on the Mechanical Properties of a ZrAlNiCu Metallic Glass

The microstructure, fracture mechanism and their correlation with the mechanical properties of as-cast Mg-Nd-Zn-Zr alloy under the effect of cooling rate

Effect of cooling rate on microstructure and mechanical properties of rapidly solidified Al-based bulk alloys

Effect of Cooling Rate on the Solidified Microstructure of Mg-Gd-Y-Zr Alloy

Effect of cooling rate on the microstructure and mechanical properties of sand-casting Mg-10Gd-3Y-0.5Zr magnesium alloy

Effect of cooling rate on the microstructure and mechanical properties of ZK60 alloy

The Effects of Annealing on the Microstructure and the Dynamic Mechanical Strength of a ZrCuNiAl Bulk Metallic Glass

Cooling Rate Effect of Nanomechanical Response for A Ti-Based Bulk Metallic Glass

Temperature and Strain Rate Dependence of Deformation Behavior of Zr65Al7.5Ni10Cu17.5

Plasticity of a TiCu-based Bulk Metallic Glass: Effect of Cooling Rate