Abstract:The effects of thermal treatments on metallic glass nanolaminates (NLs), with a composition of Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ and a bilayer period of 50 nm, were explored to control their mechanical properties through annealing-induced atomic structure modifications, structural relaxation, and partial crystallisation. Annealing treatments up to 330 °C ($T$ < $T_g$, the glass transition temperature) maintain the amorphous structure of the NLs, while inducing atomic structural relaxation, densification, and free volume annihilation, reducing the formation of corrugations on fracture surfaces. Atom probe tomography measurements reveal that annealing at 330 °C for 60 mins also causes intermixing between layers, altering their compositions to Zr$_{44}$Cu$_{56}$ and Zr$_{55}$Cu$_{45}$ with increased mixing enthalpy. Moreover, the NLs exhibit superior thermal stability against crystallisation compared to their monolithic counterparts, remaining amorphous up to 420 °C, while the monolithic Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ films are crystalline at 390 °C, as a result of chemical interdiffusion and the heterogeneous NL structure of delaying the onset of crystallisation. Annealing treatments $T$ > $T_g$ ($\sim$420 °C) induce partial crystallisation, forming Cu-Zr-based intermetallic and Zr-oxide phases, whereas annealing $T$ < $T_g$ (330 °C) retains a visible layer structure. Nanoindentation analyses show a progressive increase in elastic modulus and hardness for higher annealing temperatures as a result of structural relaxation and likely nanocrystal formation, with a maximum hardness equal to 7.6 $\pm$ 0.2 GPa obtained after heat treatment at 420 °C for 60 mins and exceeding the rule-of-mixtures. These results highlight the potential of thermal treatments to tailor the structural, mechanical and thermal properties of metallic glass NLs.

The Effects of Annealing on the Microstructure and the Dynamic Mechanical Strength of a ZrCuNiAl Bulk Metallic Glass

Microstructure and mechanical properties of Zr46Cu46Al8 bulk metallic glass after annealing treatment

Incorporation of ultrafine nanograins in Zr–Cu–Al–Ni–Co bulk metallic glass enabling significantly improved mechanical properties

Influence of Annealing on the Tribological Properties of Zr-based Bulk Metallic Glass

Effects of Annealing on the Microstructure, Corrosion Resistance, and Mechanical Properties of RE65Co25Al10 (re=ce, La, Pr, Sm, and Gd) Bulk Metallic Glasses

Isothermal Stability and Selected Mechanical Properties of Zr48Cu36Al8Ag8 Bulk Metallic Glass

Thermal modification of ZrCu metallic glass nanolaminates: Structure and mechanical properties

Effect of isothermal annealing on microstructure evolution and mechanical properties of Zr50Cu34Al8Ag8 amorphous alloy

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

Effects of annealing treatment on microstructure and tensile behavior of the Mg-Zn-Y-Nd alloy

Sub-T-g Annealing Effect on the Kinetics of Glass Transition and Crystallization for a Ti-Zr-Be-Fe Bulk Metallic Glass

Evolution of B19’ phase during annealing and its influence on the mechanical properties of Zr45Cu45Al10 metallic glass composites

Enhancing strength and plasticity of Zr-based bulk metallic glasses by Zr partially substituted Fe and isothermal annealing

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

High-pressure annealing driven nanocrystal formation in Zr50Cu40Al10 metallic glass and strength increase

The Structural Relaxation Study of Zr–Cu–Ni–Al Metallic Glass During Heating by Small-Angle X-ray Scattering

Effect of annealing treatment on texture evolution, microstructure and mechanical properties of an extruded Mg-Gd-Zn-Zr alloy

Crystallization behavior of ZrAlNiCu bulk metallic glass with wide supercooled liquid region

Improving fatigue property of Zr–Ni–Al metallic glass by tailoring chemical composition with high structure stability

Mechanical Properties of Monolithic Zr62Al8Ni13Cu17 Bulk Metallic Glass

Microstructural mechanisms of tuning the deformation behaviors in annealed metallic glasses