Abstract:Solid propellant is a composite material exhibiting classic nonlinear viscoelastic mechanical characteristic, which is due in a large part to a cumulative damage process caused by the formation and growth of microflaws inside. The standard relaxation tests and uniaxial tension tests under different velocities of hydroxyl-terminated polybutadiene (HTPB) propellant are carried out in this paper, where Digital Image Correlation (DIC) technique is applied to record deformation. The experimental results show that the material mechanical behavior is rate-dependent. It is also observed that the yield stress and failure stress are significantly rate-dependent on the tensile velocity. Based on these experimental results, it can be inferred that the stiffness degradation and damage evolution of HTPB propellant are a rate-dependent processes. Therefore, the damage accumulation of HTPB propellant is considered rate-dependent in this research. In order to describe the mechanical characteristic precisely, a nonlinear viscoelastic constitutive model with rate-dependent cumulative damage is developed. The damage model is developed based on the concept of pseudo strain, in which a Prony series representation of viscoelastic material functions is applied. Besides, a rate-dependent damage variable is introduced into the model through considering the rate-dependent characteristics of cumulative damage process. In addition, a new normalized failure criterion is derived on the basis of the proposed damage model, which is independent of strain-rate after normalization. Finally, it is implemented in commercial finite element software for stress analysis to verify the predictive capacities of the damage model. The accuracy of the constitutive model and failure criterion is validated under uniaxial tensile tests of various strain rates.

Viscoelastic constitutive relation of composite solid propellant based on the first law of thermodynamics

Viscoelastic Bilinear Cohesive Model and Parameter Identification for Failure Analysis of Adhesive Composite Joints

A nonlinear viscoelastic constitutive model for cyclically loaded solid composite propellant

A Nonlinear Viscoelastic Constitutive Model for Solid Propellant with Rate-Dependent Cumulative Damage

A nonlinear viscoelastic constitutive model with damage and experimental validation for composite solid propellant

Finite Element Analysis of Adhesive Failure of Solid Composite Propellant Multi-material Structure for Underwater Intelligent Equipment

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

Numerical Simulation on the Interface Debonding in Solid Propellant under Large Deformation by a Cohesive Zone Model

Microstructural Simulations of Polymer Composites by a Viscoelastic Spring Lattice Model

Research on the statistical damage constitutive model for composite solid propellant

Cohesive zone modeling for viscoplastic behavior at finite deformations

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Structural Integrity Assessment of a Solid Propellant Grain Considering Confining Pressure Effect

Research of Constitutive Relation of Metal Powder in High Velocity Compaction

A constitutive model of solid propellants considering aging and confinement pressure

Prediction of temperature dependent effective moduli of metal particle composites with debonding damage

Modeling viscoelasticity-viscoplasticity of high-strain composites for space deployable structures

Effective thermodynamic potentials and internal variables: Linear viscoelastic composites

On the Interfacial Debonding of Particulate-Reinforced Nonlinear Viscoelastic Polymeric Material

Application of fractional calculus methods to viscoelastic behaviours of solid propellants

A multiscale approach for the development of a nonlinear viscoelastic friction-and-cavitation-based model for solid propellants