Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Bandwidth Characteristics of Fiber Bragg Grating Fabricated with Femtosecond Laser Radiation

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Suppression of the Thermal Effects in the Femtosecond Laser Processing of Fiber Bragg Gratings

Application of Fiber Lasers Based on Femtosecond Laser Inscribed Fiber Bragg Gratings

Characteristics of Fibre Bragg Gratings and Influences on High-Power Raman Fibre Lasers

Enhanced temperature characteristics of strain-assisted fiber Bragg gratings inscription by femtosecond laser pulses

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Review of Femtosecond-Laser-Inscribed Fiber Bragg Gratings: Fabrication Technologies and Sensing Applications

High-Efficiency Inscription of Fiber Bragg Grating Array with High-Energy Nanosecond-Pulsed Laser Talbot Interferometer

High-quality fiber Bragg grating inscribed in ZBLAN fiber using femtosecond laser point-by-point technology.

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Femtosecond laser fabrication of large-core fiber Bragg gratings for high-power fiber oscillators

Phase-shifted Gratings Fabricated with Femtosecond Laser by Overlapped Two Types of Fiber Bragg Gratings

Slit Beam Shaping for Femtosecond Laser Point-by- Point Inscription of High-Quality Fiber Bragg Gratings

Spectral Characteristics of Square-Wave-Modulated Type II Long-Period Fiber Gratings Inscribed by a Femtosecond Laser

Technology of fiber grating inscription with phase mask and IR femtosecond laser

LASER DIRECT WRITING OF LONG PERIOD FIBER GRATING BY 800 NM FEMTOSECOND LASER PULSES

Investigating key factors for optimizing FBG inscribed by femtosecond laser

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

Transmission characteristics of long-period fiber gratings via radiation of femtosecond laser