Abstract:A micromachined resonator immersed in liquid provides valuable resonance parameters for determining the fluidic parameters. However, the liquid operating environment poses a challenge to maintaining a fine sensing performance, particularly through electrical characterization. This paper presents a piezoelectric micromachined cantilever with a stepped shape for liquid monitoring purposes. Multiple modes of the proposed cantilever are available with full electrical characterization for realizing self-actuated and self-sensing capabilities. The focus is on higher flexural resonances, which nonconventionally feature two-dimensional vibration modes. Modal analyses are conducted for the developed cantilever under flexural vibrations at different orders. Modeling explains not only the basic length-dominant mode but also higher modes that simultaneously depend on the length and width of the cantilever. This study determines that the analytical predictions for resonant frequency in liquid media exhibit good agreement with the experimental results. Furthermore, the experiments on cantilever resonators are performed in various test liquids, demonstrating that higher-order flexural modes allow for the decoupled measurements of density and viscosity. The measurement differences achieve 0.39% in density and 3.50% in viscosity, and the frequency instability is below 0.05‰. On the basis of these results, design guidelines for piezoelectric higher-mode resonators are proposed for liquid sensing.

Resonant Frequency of the Rectangular Micro-Cantilever in Fluid-Structure Interaction

A MEMS Resonant Sensor to Measure Fluid Density and Viscosity under Flexural and Torsional Vibrating Modes

Density Measurement Sensitivity of Micro-Cantilevers Influenced by Shape Dimensions and Operation Modes

DENSITY MEASUREMENT PERFORMANCE IN FLOWING LIQUID USING MICROCANTILEVER-BASED RESONATORS UNDER BENDING AND TORSION VIBRATIONS

Characterization of higher-order resonant cantilevers for density determination in different flowing liquids

Temperature Compensation In Fluid Density Measurement Using Micro-Electromechanical Resonant Sensor

A Novel Piezoelectric Resonator for Liquid Density and Viscosity Measurement

A MEMS density sensor based on mircro-rectangular cantilever

In-Situ Measurement of Fluid Density Rapidly Using a Vibrating Piezoresistive Microcantilever Sensor Without Resonance Occurring

A Novel Slope Method for Measurement of Fluid Density with a Micro-cantilever under Flexural and Torsional Vibrations.

Determination of Fluid Density and Viscosity by Analyzing Flexural Wave Propagations on the Vibrating Micro-Cantilever

Simplified Aeroelastic Model for Fluid Structure Interaction Between Microcantilever Sensors and Fluid Surroundings

MEMS fluid density sensor based on oscillating piezoresistive microcantilever

A Trapezoidal Cantilever Density Sensor Based on MEMS Technology

A Fluid Viscosity Sensor with Resonant Trapezoidal Micro Cantilever

Piezoelectric-AlN resonators at two-dimensional flexural modes for the density and viscosity decoupled determination of liquids

Design and Simulation of MEMS Silicon Micro-Cantilever Resonant Sensor

Study on Micropressure Sensors of Cantilever Beam Circular Resonant Cavity

A MEMS fluid density sensor based on trapezoidal cantilever

A Novel Resonator Based on In-plane Mode for Fluid Density and Viscosity Measurements

A Mass Sensing Technology Based on a Dynamic Microcantilever in Liquid