Abstract:Rotating cavities with axial throughflow are found inside the compressor rotors of turbo-machines. The flow pattern and heat transfer in the cavities are known as sophisticated problems. Because of the numerical errors and model errors, as well as the stiffness introduced by low-Ma number, prediction of 3D unsteady flow and heat transfer in rotating cavity is still a challenge for modern CFD technology. An in-house 3D unsteady CFD code was developed in this study. The discontinuous galerkin method, which can fulfill any high-order accuracy on the unstructured grid, was applied to reduce the discretization errors. The SST-γ-Reθ transition model proposed by Menter was applied to reduce the model errors. To overcome the stiffness and achieve good convergence characteristics and solution quality, the preconditioning matrix technique combined with DG method was introduced for low-Ma number viscous flow. First, natural convection of air in a square cavity was studied to test the code. The feasibility and credibility, of applying the DG method and the preconditioned matrix technique for buoyancy–induced Rayleigh-Bénard like flow, were further verified. Second, the 3D compressible flow field in a rotating cavity was investigated numerically using the FV method, DG method and laminar/SA/SST-transition turbulence model. It is demonstrated that the whole flow structure of all calculated cases was similar after comparing the calculated results with the available experimental data. But, the transition turbulence model fitted the experimental data better. On the other hand, the performance of high-order method was much better for both the rotating cavity flow and natural convection, in terms of heat transfer. To better understand this phenomenon, an accuracy analysis of heat flux using DG method and FV method was performed. It showed the DG method could realize arbitrary precision of viscous stress and heat fluxes on irregular unstructured grids, while the FV method could only realize the first-order accuracy of the heat fluxes at the boundary faces and may exhibit erroneous behaviors. It also demonstrated that the high-order accuracy of gradients was needed to decrease errors of heat fluxes and viscous stresses, and that DG method was a promising method.

Investigation Of Compressor Tip Clearance Flow Based On The Discontinuous Galerkin Methods

Research on the Flow Path Design Method of Axial Flow Compressor of Gas Turbine

Prediction of 3d Unsteady Flow and Heat Transfer in Rotating Cavity by Discontinuous Galerkin Method and Transition Model

Numerical Investigation of Tip Geometry on the Tip-clearance Flow Features of a Pump-jet Propulsor

Application of a discontinuous Galerkin method on the compressible flow in the transonic axial compressor

Discontinuous Galerkin Method for Simulation of Flowfield in a Transonic Compressor Rotor

The Application Of Discontinuous Galerkin Methods In Conjugate Heat Transfer Simulations Of Gas Turbines

Numerical Study of Porous Tip Treatment in Suppressing Tip Clearance Vortices in Cavitating Flow

Numerical investigation on the influence of nonuniform tip clearance on rotor tip-clearance flow field structure

Endwall Geometric Uncertainty and Error on the Performance of Tuda-Glr-Openstage Transonic Axial Compressor

Numerical and Experimental Investigations of Tip Clearance Effects in a High-Flow-coefficient Centrifugal Compressor

Comparison of the high-order Runge-Kutta discontinuous Galerkin method and gas-kinetic scheme for inviscid compressible flow simulations

Numerical Investigation on Flow Field Distribution of Eccentric Compressors Based on Steady and Unsteady CFD Methods

Discontinuous Galerkin Method for 3-D RANS Equations

Development of a Throughflow-Based Simulation Tool for Preliminary Compressor Design Considering Blade Geometry in Gas Turbine Engine

Aerodynamics Simulations of Three-Dimensional Inviscid Flow Using Curvilinear Discontinuous Galerkin Method on Unstructured Meshes

Cfd Investigation On The Circumferential Grooves Casing Treatment Of Transonic Compressor

Numerical Simulation Of A Transonic Centrifugal Compressor Blades Tip Clearance Flow Of Vehicle Turbocharger

Robust Implicit Direct Discontinuous Galerkin Method for Simulating the Compressible Turbulent Flows

Application of Discontinuous Galerkin Method in Air-cooled Turbine Flow Thermal Coupling Calculation

Effect of Different Tip Clearance Treatments on Performance of an Axial-flow Compressor