Abstract:Rotating cavities with axial throughflow are found inside the compressor rotors of turbo-machines. The flow pattern and heat transfer in the cavities are known as sophisticated problems. Because of the numerical errors and model errors, as well as the stiffness introduced by low-Ma number, prediction of 3D unsteady flow and heat transfer in rotating cavity is still a challenge for modern CFD technology. An in-house 3D unsteady CFD code was developed in this study. The discontinuous galerkin method, which can fulfill any high-order accuracy on the unstructured grid, was applied to reduce the discretization errors. The SST-γ-Reθ transition model proposed by Menter was applied to reduce the model errors. To overcome the stiffness and achieve good convergence characteristics and solution quality, the preconditioning matrix technique combined with DG method was introduced for low-Ma number viscous flow. First, natural convection of air in a square cavity was studied to test the code. The feasibility and credibility, of applying the DG method and the preconditioned matrix technique for buoyancy–induced Rayleigh-Bénard like flow, were further verified. Second, the 3D compressible flow field in a rotating cavity was investigated numerically using the FV method, DG method and laminar/SA/SST-transition turbulence model. It is demonstrated that the whole flow structure of all calculated cases was similar after comparing the calculated results with the available experimental data. But, the transition turbulence model fitted the experimental data better. On the other hand, the performance of high-order method was much better for both the rotating cavity flow and natural convection, in terms of heat transfer. To better understand this phenomenon, an accuracy analysis of heat flux using DG method and FV method was performed. It showed the DG method could realize arbitrary precision of viscous stress and heat fluxes on irregular unstructured grids, while the FV method could only realize the first-order accuracy of the heat fluxes at the boundary faces and may exhibit erroneous behaviors. It also demonstrated that the high-order accuracy of gradients was needed to decrease errors of heat fluxes and viscous stresses, and that DG method was a promising method.

Discontinuous Galerkin Method for Simulation of Flowfield in a Transonic Compressor Rotor

Discontinuous Galerkin Method for 3-D RANS Equations

Flow Computations of Multi-Stages by URANS and Flux Balanced Mixing Models

Application of a discontinuous Galerkin method on the compressible flow in the transonic axial compressor

Numerical simulation of internal flow in forward-curved centrifugal fan

Discontinuous Galerkin Solution Of Three-Dimensional Reynolds-Averaged Navier-Stokes Equations With S-A Turbulence Model

Transitional Flow on Turbomachine Blade Using Discontinuous Galerkin Method

Prediction of 3d Unsteady Flow and Heat Transfer in Rotating Cavity by Discontinuous Galerkin Method and Transition Model

Investigation Of Compressor Tip Clearance Flow Based On The Discontinuous Galerkin Methods

The Application Of Discontinuous Galerkin Methods In Conjugate Heat Transfer Simulations Of Gas Turbines

Robust Implicit Direct Discontinuous Galerkin Method for Simulating the Compressible Turbulent Flows

Numerical simulation of unsteady single-stage transonic axial compressor flow

Application of Discontinuous Galerkin Method in Air-cooled Turbine Flow Thermal Coupling Calculation

Computation of Unsteady Flow Fields in a Pump Using Sliding Mesh Method

SOLVE OF THREE-DIMENSIONAL NAVIER-STOKES EQUATIONS IN TRANSONIC AXIAL COMPRESSOR BY USING HIGHER-ORDER HIGH RESOLUTION SCHEME

Development of a Throughflow-Based Simulation Tool for Preliminary Compressor Design Considering Blade Geometry in Gas Turbine Engine

Numerical Simulation of Turbine Stage with Cooling Gas Injection

3-D viscous numerical investigation on flow field of a transonic axial-flow fan rotor

Numerical Simulation for Steady Flow Field of Counter-Rotating Axial Fan

Numerical Simulation of Rotor-Stator Interactions in a Transonic Compressor Stage

Development of unsteady reduced-order methods for multi-row turbomachinery flow simulation based on the computational fluids laboratory three-dimensional solver