Abstract:According to China's current code for the seismic design of buildings (GB50011-2010), in the course of designing base-isolated building structures, the isolation system and superstructure are designed separately. Hence, the horizontal seismic isolation coefficient in terms of the design-based earthquake (DBE) and horizontal deformation of the isolation system under the maximum considerable earthquake (MCE) cannot be considered simultaneously. Consequently, the optimum mechanical parameters for isolation bearing and the corresponding horizontal seismic isolation coefficient used in the seismic design of the superstructure cannot be obtained. To address these shortcomings, we propose an optimum seismic design procedure for LRB base-isolated building structures to meet multilevel performance fortification criteria, where explicit mathematical formulations for horizontal seismic isolation coefficients and the horizontal deformation of isolation systems in terms of the mechanical parameters of the LRB isolation system are established by combining equivalent linearization and modal decomposition response spectrum methods. Through a parametric study, we find the critical yield strength ratio, i.e., the ratio of the yielding shear of lead core to the total weight of the LRB base-isolated structure, which leads to the minimal value of the horizontal seismic isolation coefficient. Beyond this critical yield strength ratio, an optimum solution is unavailable, as the horizontal seismic isolation coefficient and horizontal displacement of the isolation system are of a conflicting nature. By converting the multi-criterion formulation into an auxiliary problem with a scalar objective, the optimum design method of an LRB base-isolated building structure oriented to multilevel performance fortification criteria is proposed, so as to obtain the optimum yield strength ratio and the optimum second shape coefficient for the seismic design of the superstructure. A numerical example demonstrates that the seismic horizontal seismic isolation coefficient and maximum horizontal displacement of the isolation system calculated from the optimum yield strength ratio and the optimum second shape coefficient agree well with the results from the time-history method. In a comparative study, LRB base-isolated building structures designed by the critical yield strength ratio, the optimum yield strength ratio and the optimum second shape coefficient, the optimum yield strength ratio and the corresponding fixed-base superstructure are subjected to MCE and mega earthquakes, where the LRB base-isolated structure shows good seismic performance in terms of the optimum yield strength ratio, even when subjected to mega earthquakes.

Bound Direct Displacement-Based Seismic Design of Buildings

A Direct Displacement-Based Design Procedure for Base-Isolated Building Structures with Lead Rubber Bearings (Lrbs)

Static and dynamic inelastic P -Δ effect for seismic design

A direct displacement-based seismic design method

Direct Displacement-Based Seismic Performance Design of Steel Frame Structures

Seismic Vulnerability Assessment of RC Frame Buildings Designed Using the DDBD Approach: A Parametric Study

Direct Displacement-Based Seismic Performance Design Without Iteration for Steel Frame Structures

Seismic Design Based on the Yield Displacement

Direct loss‐based seismic design of low‐rise base‐isolated reinforced concrete buildings

Convex Set Theory-Based Seismic Hazard Analysis of Low Seismicity Area

A Direct Displacement-Based Design Method Based on Chinese Code of Base Isolated Structures

Design and analysis of LRB base-isolated building structure for multilevel performance targets

Performance-based plastic design of multi-story hybrid braced frames with buckling-restrained braces and shape memory alloy braces

Assessing seismic fragility on direct displacement-based designed RC frame considering SSI effect

Displacement Based Seismic Design Methodology for Building Structures

Direct loss‐based seismic design of reinforced concrete frame and wall structures

A two-level performance-based plastic design method for multi-story steel frames with double-yielding systems

Strength reserve-based seismic optimization for precast concrete frames with hybrid semi-rigid connections

Study of Anti-seismic Design Method of Steel Reinforced Concrete Bridge Beam Colum Directly Based on Displacement

Study of Displacement-Based Seismic Design for RC Frame Structures

Seismic collision potential of adjacent base-isolated buildings with corridor bridges subjected to bidirectional near-fault pulse-like ground motions