Abstract:SummaryIt is widely accepted that ductility design improves the seismic capacity of structures worldwide. Nevertheless, inelastic deformation allows serious damage to occur in structures. Previous studies have shown that a certain level of postyield stiffness may reduce both the peak displacement and residual deformation of a structure. In recent years, several high‐strength elastic materials, such as fiber‐reinforced polymer (FRP) and high‐strength steel bars, have been developed. Application of these materials can easily provide a structure with a much higher and more stable postyield stiffness. Many materials, members, and structures that incorporate both high‐strength elastic materials and conventional materials show significant postyield hardening (PYH) behaviors. The significant postyield stiffness of PYH structures can help effectively reduce both peak and residual deformations, providing a choice when designing resilient structures. However, the findings of previous studies of structures with elastic‐perfectly plastic (EPP) behavior or small postyield stiffness may not be accurate for PYH structures. The postyield stiffness of a structure must be considered an important primary structural parameter, in addition to initial stiffness, yielding strength, and ductility. In this paper, extensive time history and statistical analyses are carried out for PYH single–degree‐of‐freedom (SDOF) systems. The mean values and coefficients of variation of the peak displacement and residual deformation are obtained and discussed. A new R‐μp‐T‐α relationship and damage index for PYH structures are proposed. A theoretical model for the calculation of residual deformation is also established. These models provide a basis for developing the appropriate seismic design and performance evaluation procedures for PYH structures.

Seismic Design Based on the Yield Displacement

Yield Point Spectra with constant ductility

Inelastic Displacement Amplification Factor for Ductile Structures with Constant Strength Reduction Factor

Static and dynamic inelastic P -Δ effect for seismic design

Yield displacement charts for performance-based seismic design

A Direct Displacement-Based Design Procedure for Base-Isolated Building Structures with Lead Rubber Bearings (Lrbs)

Inelastic Yielding Strength Demand Coefficient Spectra

Displacement-based Seismic Design Method for Square CFT Columns

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Constant yield displacement procedure for seismic evaluation of existing structures

STUDY ON THE INFLUENCE OF POST-YIELDING STIFFNESS TO THE SEISMIC RESPONSE OF BUILDING STRUCTURES

Ductility-strength and strength-ductility relations for a constant yield displacement seismic design procedure

Seismic Responses of Postyield Hardening Single–degree‐of‐freedom Systems Incorporating High‐strength Elastic Material

A simplified nonlinear coupled Newmark displacement model with degrading yield acceleration for seismic slope stability analysis

Influence of Post-Yielding Stiffness to Seismic Response of Building Structures

Developments in seismic structural analysis and design

Error Study of Displacement Model for Seismic Analysis of Long-Span Structures Subjected to Multi-Support Earthquake Excitations

CONSTANT DUCTILITY INELASTIC DISPLACEMENT SPECTRUM AND ITS APPLICATION

Performance‐Based Seismic Design With Consideration of Safe Storage From Errors in Reinforced Concrete Member Estimated Yield Deformation

Seismic Response of Yielding Structures Coupled to Rocking Walls with Supplemental Damping

Seismic displacement of bedding slopes stabilized with anchor cables and piles considering dynamic yield acceleration