Abstract:International Journal of Modern Physics B, Ahead of Print. This research focuses on the sustainable optimization of the milling process for Titanium Alloy Ti-6Al-4V using Minimum Quantity Lubrication (MQL) assistance. This experimental research investigates the effects of cutting parameters and lubrication conditions on the surface roughness ([math]) and flank wear ([math]) in the milling process of Titanium Alloy Ti-6Al-4V. The study aims to evaluate the influence of cutting speed ([math]), feed rate ([math]) and depth of cut ([math]) on the selected machining performance indicators. The experiments were carried out using a DMG Mori Seiki DMU50 CNC center, and the workpiece samples were measured at [math]. Three different lubrication conditions were employed, including dry machining, conventional flood cooling and Minimum Quantity Lubrication (MQL) using peanut oil. The cutting parameters were varied based on a Taguchi L9 orthogonal array design to explore the main effects of each parameter on [math] and [math]. The results reveal that cutting speed ([math]) has the most significant influence on surface roughness, followed by feed rate ([math]), while the impact of depth of cut ([math] is negligible in comparison. Conversely, the coolant mode has the most significant impact on flank wear ([math]), followed by feed rate ([math]) and depth of cut ([math]), while the influence of cutting speed ([math] is relatively minor. Under the same cutting parameters, transitioning from dry machining to MQL led to a sharp decrease in [math] from 170 to 100[math][math]m, and it increased to approximately 145[math][math]m when switching to flood cooling. Additionally, increasing the feed rate from 0.02 to 0.06[math]mm/tooth reduced [math] from around 135 to 120[math][math]m, but it significantly rose to approximately 165[math][math]m when the feed rate was further increased. Furthermore, the application of MQL with peanut oil as a lubricant and coolant demonstrated improvements in surface finish and reduced tool wear compared to dry and conventional flood cooling. The MQL approach led to better machining performance with lower [math] and [math] values. Overall, this study provides valuable insights into the effects of cutting parameters and lubrication conditions on surface roughness and flank wear in the milling process of Titanium Alloy Ti-6Al-4V. The findings offer practical guidelines for optimizing machining conditions to achieve desired surface quality and extend tool life while considering the environmental benefits of employing MQL in the manufacturing process.

Experimental Study on Micro-Milling of Ti6Al4V with Minimum Quantity Lubrication

Selection of Minimum Quantity Lubrication (MQL) Parameters in Milling of Ti-6Al-4V

Investigation Of Cutting Force And Temperature Of End-Milling Ti-6al-4v With Different Minimum Quantity Lubrication (Mql) Parameters

Investigation of friction in end-milling of Ti-6Al-4V under different green cutting conditions

Minimum Lubrication Milling of Titanium Alloys

Investigation of Grinding Ti-6al-4v under Minimum Quantity Lubrication (mql) Condition

Influence of Minimum Quantity Lubrication Parameters on Tool Wear and Surface Roughness in Milling of Forged Steel

Investigation on Surface Grinding of Ti-6Al-4V Using Minimum Quantity Lubrication

Effect of Minimum Quantity of Lubricant on Carbide Tools and Surface Integrity in the Machining of Titanium Aluminides

Towards sustainable manufacturing: Multiple optimization of surface roughness [math], flank wear [math] in MQL-assisted milling of Titanium Alloy Ti-6Al-4V

The machinability of titanium alloy thin-wall parts in cooling minimum quantity lubrication (CMQL) environments

Investigation of Machinability in Minimum Quantity Lubrication Milling of Gh4169 Aerospace Superalloy

Investigation on cutting performance in ultrasonic assisted helical milling of Ti6Al4V alloy by various parameters and cooling strategies

An Experimental Investigation on Effects of Minimum Quantity Lubrication Oil Supply Rate in High-Speed End Milling of Ti–6Al–4V

Effects of cooling air temperature on cryogenic machining of Ti–6Al–4V alloy

Tool Wear and Machined Surface Characteristics in Side Milling Ti6Al4V under Dry and Supercritical CO2 with MQL Conditions

Tribology and machinability performance of hybrid Al2O3 -MWCNTs nanofluids-assisted MQL for milling Ti-6Al-4 V

Experimental Study on Surface Microscopic Characteristics of scCO2-MQL Milled γ-TiAl Alloy

Experimental investigation of ultrasonic vibration-assisted cryogenic minimum quantity lubrication for milling of Ti-6Al-4V and grinding of Zerodur

Effect of minimum quantity lubrication and vortex tube cooling on laser-assisted micromilling of a difficult-to-cut steel