Abstract:Abstract A high-precision evaluation of ultrasonic detection sensitivity for a micro-crack can be restricted by a corroded rough surface when the surface microtopography is of the same order of magnitude as the crack depth. In this study, a back-surface micro-crack is considered as a research target. A roughness-modified ultrasonic testing model for micro-cracks is established based on a multi-Gaussian beam model and the principle of phase-screen approximation. The echo signals of micro-cracks and noises corresponding to different rough front surfaces and rough back surfaces are obtained based on a reference reflector signal acquired from a two-dimensional simulation model. Further comparison between the analytical and numerical models shows that the responses of micro-cracks under the effects of different corroded rough surfaces can be accurately predicted. The numerical and analytical results show that the echo signal amplitude of the micro-crack decreases significantly with an increase in roughness, whereas the noise amplitude slightly increases. Moreover, the effect of the rough front surface on the echo signal of the micro-crack is greater than that of the rough back surface. When the root-mean-square (RMS) height of the surface microtopography is less than 15 μm, the two rough surfaces have less influence on the echo signals detected by a focused transducer with a frequency of 5 MHz and diameter of 6 mm. A method for predicting and evaluating the detection accuracy of micro-cracks under different rough surfaces is proposed by combining the theoretical model and a finite element simulation. Then, a series of rough surface samples containing different micro-cracks are fabricated to experimentally validate the evaluation method.

3D Topography Evolution of Micro Cracks of Subsurface Damages During Etching Process

3D Topography of the Micro Cracks of Subsurface Damages by Etching Process

Surface Roughness and Morphology Evolution of Optical Glass with Micro-Cracks During Chemical Etching

Application of Finite Difference to Study Morphology Evolution During Etching the Optical Surface with Subsurface Damage

Laser Modulation Simulation of Micro-Crack Morphology Evolution During Chemical Etching

Effect of Micro-Crack and Reaction Product on Laser Damage Performance of Optical Glass During Chemical Etching

Subsurface Damage Structure and Eliminating

3D Digital Analysis of Cracking Behaviors of Rocks through 3D Reconstruction Model under Triaxial Compression

Effect of Brittle Scratches on Transmission of Optical Glass and Its Induced Light Intensification During the Chemical Etching

Modeling and Experimental Analysis of Roughness Effect on Ultrasonic Nondestructive Evaluation of Micro-crack

Relationship Between Subsurface Damage and Surface Roughness of Glass BK7 in Rotary Ultrasonic Machining and Conventional Grinding Processes

Numerical Simulation of the Interaction of Laser-Generated Rayleigh Waves with Subsurface Cracks

A Study on Surface Topography in Cavitation Erosion Tests of AlSi10Mg

Subsurface Damage Detection And Damage Mechanism Analysis Of Chemical-Mechanical Polished Optics

Relationship Between Surface Roughness and Subsurface Crack Depth During Grinding of Optical Glass BK7

Accuracy of the Subsurface Damage Parameters Calculated by the Finite Difference Algorithm

Investigation On Hf Based Etching Of The Polished K9 Glasses And Its Application In The Subsurface Damage

Subsurface damage evaluation in the single abrasive scratching of BK7 glass by considering coupling effect of strain rate and temperature

Holographic inversion detection method for micro cracks on damaged layer of subsurface of brittle material

Fast Predicting Statistical Subsurface Damage Parameters of the K9 Sample

The Influence of Subsurface Damage’s Micro Crack on the Optical Properties of the Optical Components