Abstract:Understanding the heat transfer of winglet tips is crucial for their applications in high pressure turbines. The current paper investigates the heat transfer performance of three different winglet-cavity tips in a transonic turbine cascade at a tip gap of 2.1% chord. A cavity tip was studied as the baseline case. The cascade operates at engine representative conditions of an exit Mach number of 1.2 and an exit Reynolds number of 1.7×106. Transient infrared thermography technique was used to obtain the tip distributions of heat transfer coefficient for different tips in the experiment. The CFD results were validated with the measured tip heat transfer coefficients, and then used to explain the flow physics related to heat transfer. It is found that on the pressure side winglet, the flow reattaches on the top winglet surface and results in high heat transfer coefficient. On the suction side winglet, the heat transfer coefficient is low near the blade leading edge, but is higher from the mid-chord to the trailing edge. The suction side winglet pushes the tip leakage vortex further away from the blade suction surface and reduces the heat transfer coefficient from 85% to 96% span on the blade suction surface. However, the heat transfer coefficient is higher for the winglet tips from 96% span to the tip. This is because the tip leakage vortex attaches on the side surface of the suction side winglet and results in quite high heat transfer coefficient on the front protrusive part of the winglet. The effects of relative endwall motion between the blade tip and the casing were investigated by CFD methods. The endwall motion has a significant effect on the flow physics within the tip gap and near tip region in the blade passage, thus affects the heat transfer coefficient distributions. With relative endwall motion, a scraping vortex forms inside the tip gap and near the casing, and the cavity vortex gets closer to the pressure side squealer/winglet. The tip leakage vortex in the blade passage becomes closer to the blade suction surface, resulting in an increase of the heat transfer coefficient.

Aerodynamic performance of tip leakage flow of two different blade tips in transonic turbine

Aerothermal Performance of Different Tips in Transonic Turbine Cascade with End-Wall Motion

Experimental and Numerical Investigations for Dual−Cavity Tip Aerodynamic Performance in the Linear Turbine Cascade

Effects of Tip Cavity Geometries on the Aerothermal Performance of the Transonic Turbine Blade with Cavity Tip

Transonic Turbine Blade Tip Aerothermal Performance with Different Tip Gaps—Part I: Tip Heat Transfer

Aerothermal performance of cavity tip with flow structure effects in a transonic high-pressure turbine blade

Tip Gap Size Effects on Thermal Performance of Cavity-Winglet Tips in Transonic Turbine Cascade with Endwall Motion

Transonic Turbine Blade Tip Aero-Thermal Performance With Different Tip Gaps: Part Ii-Tip Aerodynamic Loss

Influences of a Multi-Cavity Tip on the Blade Tip and the over Tip Casing Aerothermal Performance in a High Pressure Turbine Cascade

Numerical Study of Tip Leakage Vortex Around a NACA0009 Hydrofoil

The Tip Leakage Flow of an Unshrouded High Pressure Turbine Blade with Tip Cooling

Experimental and numerical investigation of high load turbine blade tip cavity structures

Numerical analysis of the aerodynamic performance and excitation forces in a transonic turbine cascade with flat-tip and squealer-tip blades

Heat Transfer of Winglet Tips in a Transonic Turbine Cascade

Numerical Investigation on the Effect of Tip Clearance on a Turbine Stage Flow-field and Aerodynamic Performance

Experimental Study on Axially Non-Uniform Clearances in a Linear Turbine Cascade with a Cavity Squealer Tip

Effects of Tip Leakage Flow on Aerodynamic Performance of a Low-Reaction Transonic Rotor

Unsteady Winglet-Cavity Tip on Leakage Flow in a High-Pressure Turbine Stage of Low-Aspect Ratio

Role of Tip Leakage Flow in an Ultra-Highly Loaded Transonic Rotor Aerodynamics

Effects of Tip Injection in Different Locations on Clearance Leakage Flow of Turbine

Investigation on Film Cooling and Aerodynamic Performance of the Multi-Cavity Tip with Inclined Film Holes in a Linear Turbine Cascade