Abstract:In order to address the time-consuming and labor-intensive challenges as well as the suboptimal operational quality encountered in the conventional processes of fruit bagging within expansive orchards, an innovative end-of-bagging actuator is proposed, which can be installed on a fruit-production robot. Due to the excessive power sources required to complete the bagging operation, while also taking into account the quality and cost of the end effector, we have implemented a clutch transmission system to control individual motors, thereby achieving efficient bag-opening and collection actions. Through kinematic analysis of the bagging end effector, the optimal bag opening size is determined to be 40.3372 mm, with a deviation of 0.1428 mm from the design target and an error rate of 0.35%. This ensures the desired bag size for bagging juvenile fruits. Moreover, a dynamic simulation model comprising rigid drive components and a flexible clutch was developed. The simulation results demonstrate the system's stable performance. However, it is evident that the gear speed falls below that of the flexible clutch, resulting in insufficient bag opening and bag gathering compared to the intended design target. The observed phenomenon is a result of the characteristics exhibited by the flexible clutch. Specifically, the demands for bagging and stretching can be accommodated by modifying the stiffness and geometric configuration of the flexible clutch, alongside the level of operational force. To conclude, the suggested end effector can successfully simulate the implementation of the manual bagging process. By taking into account the quality and cost of the end effector, a clutch drive system was utilized to regulate a single motor, resulting in efficient bag-opening and collection actions. This approach offers a more integrated and efficient solution compared to manual bagging and semi-automatic mechanically assisted bagging methods.

Design and simulation of pineapple picking-gripper based on MATLAB image processing

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Design and Analysis of a Robotic Gripper Mechanism for Fruit Picking

Structural design and analysis of an automatic pineapple picking and collecting straddle machine

New design and construction of a mechanical gripping device with a telescopic link of a fruit harvesting robot

Design and Testing of an End-Effector for Tomato Picking

Design, simulation, and experiment for the end effector of a spherical fruit picking robot

Design of an End-effector with Application to Avocado Harvesting

Design and performance tests of IPMC flexible grippers

DESIGN AND SIMULATION OF THREE-DEGREE-OF-FREEDOM WRIST STRUCTURE OF PICKING MANIPULATOR

Model Analysis and Experimental Investigation of Soft Pneumatic Manipulator for Fruit Grasping

Development and Experimental Validation of a 3D-Printed Force-Sensing Grabber for Automated Pineapple Harvesting

Human Grasp Mechanism Understanding, Human-Inspired Grasp Control and Robotic Grasping Planning for Agricultural Robots

Design of mechanical arm structure for harvesting fruit and vegetable crops

Design and Simulation of End Effector for Young-Pear-Bagging Robot

Analysis on the Mechanism Design and Working Performance of Fruit Picking Manipulator

Design and development of a peduncle-holding end effector for robotic harvesting of mango

An Integrated Multi-Sensor Network for Adaptive Grasping of Fragile Fruits: Design and Feasibility Tests

Compact robotic gripper with tandem actuation for selective fruit harvesting

Analysis and Design of an Auxiliary Catching Arm for an Apple Picking Robot

Optimization and experimental study on structural parameters of bio-inspired tarsus compliant end-effector to reduce the risk of fruit sliding out from end-effector for cherry tomato harvesting