Abstract:Robotics can play a significant role to increase efficiency and lighten the farmer’s load. Despite challenges in the agricultural robotic designs, robots are capable of performing various tasks and changing themselves accordingly, based on specific conditions. To address modern problems in the agricultural field, an agricultural robot is one of the key technologies. Although agricultural robotic is still in the development stage, robots have a bright future ahead. This paper proposes a new 5DOF articulated robotic arm design that would become a solution for heavy crop harvestings like pumpkin and cabbage. After the development stage, this robotic arm will be mounted on a robot tractor for real experimentation. The main design process of this robotic arm was conceived using 6 stages of Shigley design process. All components were designed, assembled and analyzed by using Solidworks 2014 in compliance with Japanese Industrial Standards (JIS) standards. The parts of the system that had dynamic nature were analyzed manually using standard mechanical formulas. Calculations of the workspace required joint torque, and coordination of mass center position was done by using standard machine design methods. Denavit-Hartenberg method was used to calculate forward and inverse kinematics. To resolve the torque reduction, components were designed using different materials and mass centers and comparing their performance. Results showed that total torque in Joints number 1, 2, 3, 4 and 5 were 6.15, 257.35, 103.4, 20.2 and 0.1 respectively with a rotational speed range of 15 ~ 60 rpm. Changes in the linkage material and servo motor location improved 29.7% ~ 47.7% and 29.7% ~ 68.9% of the total required torque for each joint. The maximum distance covered by the arm was 1421 mm from the and 2026 mm from the attachment point. According to the feedback received

Design of mechanical arm structure for harvesting fruit and vegetable crops

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Simple and Reliable: Mechanics Analysis for Robotic Arm of Strawberry Picking Robot

Property Analysis and Structure Optimization of Robotic Arm Based on SolidWorks and ANSYS

Design and Control of a Novel Six-Degree-of-Freedom Hybrid Robotic Arm

The Control and Co-simulation of Picking Robot Arm

Design and Analysis of a Robotic Gripper Mechanism for Fruit Picking

System Design and Control of an Apple Harvesting Robot

Analysis on the Mechanism Design and Working Performance of Fruit Picking Manipulator

Design of an End-effector with Application to Avocado Harvesting

Kinematics Analysis and Simulation of A 5DOF Articulated Robotic Arm Applied to Heavy Products Harvesting

Analysis and Design of an Auxiliary Catching Arm for an Apple Picking Robot

Design, simulation, and experiment for the end effector of a spherical fruit picking robot

Structural Parameter Optimization of a Tomato Robotic Harvesting Arm: Considering Collision-Free Operation Requirements

Design and Testing of an End-Effector for Tomato Picking

New design and construction of a mechanical gripping device with a telescopic link of a fruit harvesting robot

Development of a 5DOF robotic arm (RAVebots-1) applied to heavy products harvesting

Structural design and analysis of an automatic pineapple picking and collecting straddle machine

Analysis of object-oriented kinematics and dynamics of multi-arms cooperating systems

Model Analysis and Experimental Investigation of Soft Pneumatic Manipulator for Fruit Grasping

Design, Modeling, and Control of a Low-Cost and Rapid Response Soft-Growing Manipulator for Orchard Operations