Abstract:Heat pipes and two-phase thermosyphon systems are passive heat transfer systems that employ a two-phase cycle of a working fluid within a completely sealed system. Consequently, heat exchangers based on heat pipes have low thermal resistance and high effective thermal conductivity, which can reach up to the order of (105 W/(m K)). In energy recovery systems where the two streams should be unmixed, such as air-conditioning systems of biological laboratories and operating rooms in hospitals, heat pipe heat exchangers (HPHEs) are recommended. In this study, an experimental and theoretical study was carried out on the thermal performance of an air-to-air HPHE filled with two refrigerants as working fluids, R22 and R407c. The heat pipe heat exchanger used was composed of two rows of copper heat pipes in a staggered manner, with 11 pipes per row. Tests were conducted at different airflow rates of 0.14, 0.18, and 0.22 m3/h, evaporator inlet-air temperatures of 40, 44, and 50°C, filling ratios of 45%, 70%, and 100%, and ratios of heat capacity rate of the evaporator to condenser sections (Ce/Cc) of 1 and 1.5. For HPHE's steady-state operation, a mathematical model for heat-transfer performance was set and solved using MATLAB. Results illustrated that the heat transfer rate was in direct proportion with the evaporator inlet-air temperature and flow rate. The highest HPHE's effectiveness was obtained at a 100% filling ratio and (Ce/Cc) of 1.5. The predicted and experimental values of condenser outlet-air temperature were in good agreement, with a maximum difference of 3%. HPHE's effectiveness was found to increase with the increase in evaporator inlet-air temperature and number of transfer units (NTU) and with the decrease in airflow rate, up to 33% and 20% for refrigerants R22 and R407c, respectively. Refrigerant R22 was the superior of the two refrigerants investigated.

Experimental Study on a Pump Driven Loop-Heat Pipe for Data Center Cooling

Development and Analysis of a Pump-Driven Loop Heat Pipe Unit for Cooling a Small Data Center

Experimental Study on the Thermal Performance of Flat Loop Heat Pipe Applied in Data Center Cooling

Investigation of a Gas-Pump-Driven Loop Heat Pipe

Simulation of Steady-State Operation of an Ejector-Assisted Loop Heat Pipe with a Flat Evaporator for Application in Electronic Cooling

Thermal Performance of a Pump-Driven Loop Heat Pipe As an Air-to-air Energy Recovery Device

Experimental study on data center heat pipe air conditioning system

Experimental research on boiling heat transfer mechanism of a pump-driven loop thermosiphon for R134a coolant

Experimental Investigation Thermal Performance of Loop Heat Pipe Operating with Different Working Fluids

Application Research for Pump-driven Loop Heat Pipe System Using R32 to Replace R22

Experimental and Numerical Investigation on a CO2 Loop Thermosyphon for Free Cooling of Data Centers

A Combined Cooling Solution for High Heat Density Data Centers Using Multi-Stage Heat Pipe Loops

Effect of Key Structure and Working Condition Parameters on a Compact Flat-Evaporator Loop Heat Pipe for Chip Cooling of Data Centers

Experimental study on the thermal performance of a liquid-cooled heat sink integrating heat pipes for dual CPU servers

Flow boiling heat transfer mechanisms and flow characteristics of pump-driven two-phase flow systems used in data center cooling

An Experimental Investigation of an R744 Two-Phase Thermosyphon Loop Used to Cool a Data Center

Performance Investigation on an Air Source Heat Pump System with Latent Heat Thermal Energy Storage

Experimental Study on a Hydrogen Closed-Loop Pulsating Heat Pipe with Two Turns

Operating Characteristics of a Pump-driven Loop Heat Pipe Energy Recovery Device

Experimental comparison and numerical study of flow and heat transfer characteristics of the pipe rows in heat pipe heat exchanger

Theoretical and experimental investigation of a heat pipe heat exchanger for energy recovery of exhaust air