Abstract:In order to solve the problem that the conducted interference voltage of a high voltage/low voltage (HV/LV) DC-DC converter for vehicles exceeds the standard CISPR25-2016, two different design methods of EMI filter for HV power supply were proposed. The first method is to design a wide-band EMI filter at the high-voltage input port of the DC-DC converter. It can achieve the insertion loss of 60dB within 150kHz-108MHz. Another proposed method is to design a PCB-level EMI filter based on the resonance peaks suppression. During the PCB-level EMI filter design process, a high frequency equivalent circuit model of HV/LV DC-DC converter of EV considering the parasitic parameters was established, and by establishing the transfer functions at key frequencies of 200 kHz and 2 MHz, the dominated parameters responsible for the over-standard points were determined. From simulation and experiment results, the filters designed by above two methods can effectively reduce the conducted disturbance and comply with the limits requirements in 150kHz-108MHz. What's more, the PCB-level filter designed by the second method is smaller in size, only 1/5 of the filter size designed by the first method, lower in cost,and easy to be engineering.

Techniques for Improving the High-Frequency Performance of the Planar CM EMI Filter

A Systematic Design and Optimization Technique for the Suppression of EMI Common Mode (CM) Noise

Fast characterization of hybrid near-field coupling effects of multi-PCBs in rectangular cavities with FFT-accelerated integral-equation method

EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes

Design, Modeling, and Improvement of Integrated EMI Filter With Flexible Multilayer Foils

Integrated EMI filter design with flexible PCB structure

PCB Layout Optimization of High-Frequency Inverter for Magnetic Coupled Resonance Wireless Power Transfer System

Design and Experiment Research of Integrated EMI Filter Based on Flexible Multi-Layer Foils

Elimination of Common-Mode Choke Saturation Caused by Self-Resonance of the EMI Filter in a Variable-Frequency Drive System

Principles and design on integrated EMI filters

Identification and Improvement of Stray Coupling Effect in an L-C-L Common Mode EMI Filter

Design of EMI Filter for Suppressing High Frequency Electromagnetic Emissions

3 Kw Completely-Integrated EMI Filter Based on Flexible Multi-layer Foil

Integration of Both EMI Filter and Boost Inductor for 1-Kw PFC Converter

Study on the EMI filters to EFT/B tests in power converters

Investigation of the Influences of Different Layouts on the Performance of EMI Filters

Extraction of parasitic capacitance of integrated LC component for planar EMI filter

Design and modelling of a cost-effective embedded filter for low-impedance power distribution network

Stray Electromagnetic Coupling Effect in a Power Line EMI Filter

Electromagnetic Protection Optimization of the Intelligent Electronic Devices Based on the Passive EMI Filter Design

Comparison of Two Design Methods of EMI Filter for High Voltage Power Supply in DC-DC Converter of Electric Vehicle