Abstract:This manuscript delineates a predictive model for evaluation of residual stress phenomena in micro-machining operations, predicated upon the symbiotic dynamics of strain, strain rate, and thermal conditions. The objective is to scrutinize the ramifications of variable parameters such as machining velocity, axial depth of cut, and cutting tool’s rake angle on the resultant machining forces and induced residual stresses. By analyzing the interplay between the shear forces, frictional stresses, and the material deformation forces during micro-machining, alongside the correlation between shear velocity and material displacement, as well as thermal contributions in both primary and secondary deformation regions involving the substrate, removed material, and the cutting implement, the residual stresses are deduced employing the Johnson-Cook material behavior model, manifesting predominantly as compressive residual stresses within the work material. The veracity of the analytical model for residual stress is corroborated with the maximum relative discrepancies for principal cutting force and residual stress at 16.8% and 6.53%, respectively, both falling under the 15% threshold, thus affirming the model’s precision. Empirical findings underscore the axial depth of cut as the most influential parameter on machining forces, with theoretical escalations of 183.84% and 145.67% in the orthogonal X and Y directions accordingly, as the depth of cut augments from 10 to 25 μm. Conversely, the machining velocity predominantly affects the thermal profile and residual stress levels; a surge in machining velocity from 400 to 800 mm/min correlates with a theoretical amplification in thermal generation by 227.52%, while concurrently registering a decrement in residual stress magnitude by 7.08%.

Predictive Modeling of Residual Stress in Minimum Quantity Lubrication Machining

Analytical modeling of residual stress in end-milling with minimum quantity lubrication

A New Approach to Predict Machining Force and Temperature with Minimum Quantity Lubrication

Analytical Modelling of Cutting Force in End-Milling with Minimum Quantity Lubrication

Predicting the Effects of Cutting Fluid on Machining Force, Temperature and Residual Stress Using Analytical Method.

The Effects of Minimum Quantity Lubrication (MQL) on Machining Force, Temperature, and Residual Stress

Analytical modeling of milling residual stress under different tool wear conditions

Construction of a predictive model for residual stresses in micro-milling of 7075 aluminum alloy

Analytical Model for Temperature Prediction in Milling AISI D2 with Minimum Quantity Lubrication

Physics and data driven model for prediction of residual stresses in machining

Residual stress of grinding cemented carbide using MoS2 nano-lubricant

Prediction of residual stress with multi-physics model for orthogonal cutting Ti-6Al-4V under various tool wear morphologies

Finite element simulation of residual stress in machining of Ti-6Al-4V with a microstructural consideration

Prediction of Surface Residual Stress after End Milling Based on Cutting Force and Temperature

A 3D Analytical Model for Residual Stress in Flank Milling Process

Residual stress prediction in ultrasonic vibration–assisted milling

Mechanical behavior and semiempirical force model of aerospace aluminum alloy milling using nano biological lubricant

Calculation of residual stress in ultrasonic vibration assisted grinding considering thermal-mechanical coupling: a numerical-analytical hybrid prediction approach

A Coupling Method of Response Surfaces (CRSM) for Cutting Parameters Optimization in Machining Titanium Alloy under Minimum Quantity Lubrication (MQL) Condition

Prediction Model for the Evolution of Residual Stresses and Machining Deformation of Uneven Milling Plate Blanks

Effects of Processing Parameters and Tool Geometric Parameters on Residual Stress of Machined 304 Stainless Steel