Residual stress of grinding cemented carbide using MoS2 nano-lubricant

Zechen Zhang,Menghua Sui,Changhe Li,Zongming Zhou,Bo Liu,Yun Chen,Zafar Said,Sujan Debnath,Shubham Sharma

DOI: https://doi.org/10.1007/s00170-022-08660-z

IF: 3.563

2022-01-11

The International Journal of Advanced Manufacturing Technology

Abstract:The special mechanical properties of cemented carbide with high strength and hardness will cause complex stress due to excessive force and heat in the process of precision manufacturing, which will affect precision retention and endurance limit. Given the health and environmental threat of conventional flood cooling and the harsh processing environment of dry grinding, minimum quantity lubrication (MQL) has become an irreplaceable method to machining cemented carbide. However, the addition of nanoparticles changes the force and heat during grinding, which makes the influence on the residual stress of cemented carbide complicated. Therefore, based on the single abrasive grinding force model, the effective abrasive particle number was obtained by simulating the distribution of abrasive particles on the grinding wheel surface, and the mechanical stress model was established, which was loaded onto the workpiece in iterative attenuation mode. The thermal stress model was established based on the temperature field model. The final residual stress prediction model was obtained by determining whether the grinding process yields results and carrying out stress loading and stress relaxation. Experimental verification of the model was carried out under four different grinding conditions of YG8. The minimum friction coefficient of 0.385 was obtained under nanofluid minimum quantity lubrication (NMQL). In the precision analysis of the model, the minimum error value was 5.9% in the direction perpendicular to the feed direction of the workpiece in the dry grinding condition, which proved that the residual stress model had certain reliability.