Abstract:Abstract Most of the recent nanodevices are fabricated by using high-efficiency deposition methods and patterned via high-resolution lithography. However, there are drawbacks for the methods including small-scale product, high cost consumption, and multi-step processes. To reduce these disadvantages, this work focuses on the usage of sol-gel synthesis and spin coating method to fabricate ZnO seed layer onto glass substrates. All of substrates were patterned by conventional UV photolithography at exposure time of 7 seconds, then ZnO nanorods were hydrothermally grown at 90°C for 2, 3, and 4 hours, respectively. All of samples were characterised by scanning electron microscope (SEM) which revealed the sharp and smooth tip hexagonal structure at different hydrothermal time. The evolution of the nanorods’ growth was investigated, and the diameters were estimated. Moreover, crystal quality was revealed by x-ray diffractograms. It was clear that the domination of c-axis plane occurred for all the samples associates with the crystallinity of the nanostructures. This indicated escalating of the non-monodirectional growth plane in increasing nanorods’ diameter as the nanorods are polycrystal. Furthermore, the optical properties of the samples were observed by UV-visible spectroscopy and photoluminescence technique (PL). UV-visible spectroscopic data showed diminishing of the energy band gap when the diameter grew up. PL data revealed the reduction of the intensity ratio at near-band-edge peak versus oxygen vacancy peak. This information pointed to the decreasing trend of the crystal quality with escalating growth time.

Effect of Hydrothermal Reaction Conditions on the Sizes and Morphologies of ZnO Nanorods

Morphology Investigation of Hydrothermally Prepared ZnO Micro-Crystals Influenced by Cu2+ Ions

Effect of UV irradiation on the properties of ZnO nanorod arrays prepared by hydrothermal method

Effect of Reaction Temperature on Surface Morphology and Photoelectric Properties of ZnO Grown by Hydrothermal Method in Mixed Solvent

Effect of ammonia on morphology, wettability and photoresponse of ZnO nanorods grown by hydrothermal method

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

Alignment-controlled Hydrothermal Growth of Well-Aligned ZnO Nanorod Arrays

A Simple and Novel Low-Temperature Hydrothermal Synthesis of ZnO Nanorods

Hydrothermal synthesis of one-dimensional zinc oxides with different precursors

Controlled Synthesis of 1D ZnO Nanostructures Via Hydrothermal Process

Hydrothermal Synthesis of Well-Aligned ZnO Nanorod Arrays on Silicon

Synthesis of Single-Crystalline Pb(Zr0.52Ti0.48)O-3 Nanocrystals by Hydrothermal Method

The Effect of Cooling Rate During the Hydrothermal Growth on the Tip Geometry of ZnO Nanorods

Structure Transformation of Hydrothermally Treated ZnO Nanorod Array

Growth of Variable Aspect Ratio ZnO Nanorods by Hydrothermal Technique

Hydrothermal Grow th of Vertical and Uniform ZnO Nanorod Arrays and Related Influences

Morphology control and transition of ZnO nanorod arrays by a simple hydrothermal method

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Effect of Annealing Treatment on Morphologies and Gas Sensing Properties of ZnO Nanorods

Influence of hydrothermal time on structural properties of ZnO nanorods grown on spin-coated ZnO seeding layer

Hydrothermal Preparation of ZnO Nanorods Using Zinc Powder As Precursor and Their Characterization