Abstract:Poly(lactic acid) (PLA) is a biodegradable plastic and grabs attention in several applications such as biomedical implantation, film, packaging and clothing. Instead, PLA itself has a characteristic of brittleness, resulting in poor mechanical properties, and its slow ability in degradation leads to waste disposal problem. The present research aims to develop material in such a way to have a good combination of properties and optimum degradation ability. The PLA nanocomposites were prepared via melt blending that consisted of two types of carbon nanotubes (CNTs): unmodified carbon nanotubes (CNTs) and modified CNTs (mCNTs). The effect of 5 wt% poly (ethylene glycol) (PEG) as plasticizer on nanocomposites with CNTs material loading at 0.5 wt%, 1.0 wt%, 1.5 wt% and 2.0 wt% was studied. The analysis of physical properties was done using hardness testing and melt flow index (MFI). Neat PLA only gave around 69.0–77.6 Shore D in hardness test, while MFI exhibited around 36.1–39.4 g/10 min. PLA/mCNTs and PLA/PEG/mCNTs at 1.5 wt% exhibited the highest values of hardness testing which were 86.0 and 85.9 Shore D, respectively. In MFI study, the results were 70.0 g/10 min for PLA/mCNTs and 80.3 g/10 min for PLA/PEG/mCNTs. This proved that the PEG is useful in reducing the brittleness of nanocomposite. The full exfoliation of CNTs and mCNTs in the matrix observed from the X-ray diffraction analysis supported the excellent hardness and MFI properties. These nanocomposites also showed high thermal stability as obtained from differential scanning calorimetry and thermogravimetric analysis studies compared with neat PLA. The morphology study by field emission scanning electron microscopy analysis confirmed these findings through the existence of a smooth fracture surface, especially when PEG was loaded as evidence of good distribution of nanofiller in the matrix was established. Based on all analyses done, PLA/PEG/mCNTs were chosen as the good nanocomposite among others.

Property Reinforcement of Poly(propylene Carbonate) by Simultaneous Incorporation of Poly(lactic Acid) and Multiwalled Carbon Nanotubes

Improved molecular chain constraint of poly (propylene carbonate) composites by the synergistic effect of poly (vinyl alcohol) and carbon nanotubes

PPTA-oligomer Functionalized Multiwalled Carbon Nanotubes Synthesized by "One-Pot" Method for Reinforcement of Polyvinyl Chloride

Effect of Poly(propylene carbonate) on Properties of Polylactic Acid-Based Composite Films

Elucidating the plasticizing effect on mechanical and thermal properties of poly(lactic acid)/carbon nanotubes nanocomposites

Synergistic Effects of Multi-Wall Carbon Nanotubes and Polycaprolactone on the Thermal and Mechanical Properties of Polylactic Acid

A study on the mechanical, thermal properties and crystallization behavior of poly(lactic acid)/thermoplastic poly(propylene carbonate) polyurethane blends

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

A novel biodegradable poly(propylene carbonate) with enhanced thermal and mechanical properties by incorporating tannic acid

Enabling Design of Strong and Tough Poly(Propylene Carbonate) Through In Situ Generated Poly(Propylene Carbonate)‐Based Cross‐Linked Microdomains

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Biodegradable poly(lactic acid)/poly(propylene carbonate) blend with enhanced mechanical properties and heat resistance by uniaxial pre‐stretching

Enhanced thermal stability, toughness, and electrical conductivity of carbon nanotube-reinforced biodegradable poly(lactic acid)/poly(ethylene oxide) blend-based nanocomposites

Simultaneous improvement of tensile strength and toughness of polylactic acid by incorporating a biodegradable core‐shell nanofiller with double polymer layers

Enhanced Mechanical, Thermal and Electrical Properties of Additively Manufactured Polylactic Acid/Carbon Nanotube Polymer Nanocomposites

Thermo-Blending of Biobased Poly(propylene 2,5-furan dicarboxylate) and Poly(lactic acid) with Improved Mechanical Performance

Engineering tannic acid with tailored structure into Poly(propylene carbonate) towards supramechanical performance and multi-functions

A facile method for carbon nanotube/carbon fiber‐reinforced polylactic acid composites

Mechanical Properties and Biocompatibility of Functionalized Carbon Nanotubes/polypropylene Composites

Strong Synergistic Toughening and Compatibilization Enhancement of Carbon Nanotubes and Multi-Functional Epoxy Compatibilizer in High Toughened Polylactic Acid (pla)/poly (butylene Adipate-Co-terephthalate) (PBAT) Blends

Mechanically robust and flame-retardant poly(lactide)/poly(butylene adipate-co-terephthalate) composites based on carbon nanotubes and ammonium polyphosphate